Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
9800L HA Pair running 17.15.4dSeveral years ago we migrated from 5508 / 2504s at all our sites to this 9800L HA Pair that is in our HQ datacenter. We did have Professional Services assist in the initial setup of the 9800L and migrate the settings fr...
All of a sudden, Apple devices are displaying the captive.apple.com "Success" page when attempting to join ANY wi-fi network. It is not a DNS resolution issue. Our internal DNS forwards to Cloudflare. We tried changing them to Google's 8.8.8.8 a...
I was just asked to if I can setup a new "guest" Wi-Fi SSID *and* attach a Guest *wired* LAN connection. A 3rd party company is coming in early next year and is bringing in devices that need Wired and Wireless connections. CIO does not want them on ...
9800L-F running 17.12.02 in the Corp Data center. Large WAN sites connected via Cisco 8x00 SD-WAN devices. Small sites have S2S VPN connection to the corp datacenter using 3rd party Firewall. All remote sites APs are Flexconnected and registered t...
We are a healthcare facility. For past several months we have had several complaints from users that calls are often full of static. We are running CUCM 12.5(1)SU8 and the phones are primarily 8811 running current firmware. We have replaced phon...
Yes. I have read those docs. I don't understand the limitation as I would think many companies would have the same scenario - distributed sites with same SSIDs at all locations. We have mobile devices that are MDM locked to join specific SSID, 3r...
The SSIDs are using PSK. No captive portal is used. I discovered the root cause later this morning. I needed to run the curl *inside* my network to get complete picture. I ran it from my W11 laptop -- got the same 200 return code, but noticed t...
This Bug also affects Call Mgr v15SU3a (15.0.1.13901-2). Its not listed in the affected releases - or fixed. TAC says I have to continue to use the sql commands to fix. This Bug was posted back in March 2024 and the only permanent fix is a COP fi...
I have taken pcaps & debugs on the 9800. The device that use MAC auth gets an IP but is still prevented from accessing network despite being in Run state. The Firewall does complain about some Identity Awareness issue. I’m working with that 3rd pa...
All The remote SD-WAN flexconn sites get DHCP for Guest SSID. Central DHCP is activated in the Guest Policy. Plus, the pcap taken on the 9800-L-F clearly showed the DHCP Discover and Offer from the remote site's device trying to access Guest SSID. ...
