About patrick.glenn

patrick.glenn · 10-29-2013

Hello all,Hopefully this is an easily solved issue. Our ISR yesterday began giving a busy signal once a call is passed from the auto-attendant to the hunt group after 3 rings, even though the noan timeout is at 800. The system does not pass these cal...

patrick.glenn · 10-26-2013

Hello,We are currently running an older router which works fine for our needs, as specified in the topic. I am trying to access the GUI for the AIM-CUE and am unable to. I can access the /ccme.html for the router, but that is not integrated with the ...

patrick.glenn · 03-28-2013

Hello all!Firstly please let me thank you sincerely for your assistance in advance! This issue has been making me pull my red hair out!!!! Alright, so here is the situation:I work as an IT admin for a doctors office. Our current phone system is old a...

patrick.glenn · 10-29-2013

I believe this problem is partially due to an improper reload I was just notified of. I have reset the timeouts to 70, and although I am still unsure as to why two of the phones reset to 10 (most likely causing this issue), the issue seems to be s...

patrick.glenn · 10-29-2013

Interesting side-note: I have discovered that this problem also occures when making internal calls, with the exception of the call being forwarded to the VM system (we do not have a gen. delivery mailbox). 3 rings, then forwarded.

patrick.glenn · 10-29-2013

My issue was being unable to access the GUI for the AIM-CUE, even though the ip of the AIM was otherwise accessable (in this case 172.22.1.155). The CUE GUI was redirecting to the builtin CME GUI on the 2811. This issue was resolved by a wr erase ...

patrick.glenn · 10-29-2013

Paolo,My issue was being unable to access the GUI for the AIM-CUE, even though the ip of the AIM was otherwise accessable (in this case 172.22.1.155). The CUE GUI was redirecting to the builtin CME GUI on the 2811. This issue was resolved by a wr era...

patrick.glenn · 03-28-2013

Some additional info which might be helpful:SOEC-AIM#sh verCisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 15.1(1)T, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-2010 by Cisco Systems, I...

Member Since	‎05-25-2011 09:52 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

2811 w/AIM-CUE running CUE 7.0 Sudden Timout Glitch

Cisco 2811 w/AIM-CUE v7.0.4 gui access issue

2811 w/AIM-CUE &VIC2-4FXO & 2611xm w/Voice 2V configuration

2811 w/AIM-CUE running CUE 7.0 Sudden Timout Glitch

2811 w/AIM-CUE running CUE 7.0 Sudden Timout Glitch

Cisco 2811 w/AIM-CUE v7.0.4 gui access issue

Cisco 2811 w/AIM-CUE v7.0.4 gui access issue

2811 w/AIM-CUE &VIC2-4FXO & 2611xm w/Voice 2V configuration