About Timo Scheller

Timo Scheller · 08-21-2014

Hi, we have a lot of trouble with a new setup. Brought a new open-e storage server with Qlogic HBAs into our fabric (nexus 55xx) connected this through zoning into our B200M3 with 2.1.2a and 2.1.3a BIOS and running ESXi 5.1 Update 1b on top. After th...

Timo Scheller · 06-03-2013

Hi,we installed Sles11 SP2 on our new C220-M3 (1.5.1b), which is connected to our N5k with a VIC 1225 and has the two default vNiCs eth0 and eth1.What we see with the default enic driver from the Sles11 is a lot of packet loss. The N5k is configured ...

Timo Scheller · 11-03-2015

Hi, for Infra-Upgrade, with Downloads, Uploads, Backup-Config etc. i'd say about 1.5 hours. Of course, while nothing happend. For each blade, it will take 15 - 20 min, with B200-M3. I only did the two step upgrade for the Infra, btw. The blades i d...

Timo Scheller · 10-21-2015

Hi,we did that upgrade in August. We also used the link from above. But we got the info (partner), we had first to upgrade to the latest version of 2.1.3(g or something), then we went directly from that to 2.2.3d (Always use 2 versions down the actua...

Timo Scheller · 09-22-2014

Hi Walter,i see your point. It depends of course on the whole setup what you will do or will achieve.My point here: Simplicity.If you already have a failover setup which includes also North-Bound, of course, why bother with failover setup in the OS a...

Timo Scheller · 09-22-2014

Hi,just take this two sites and check your versions, very carefully:http://www.cisco.com/web/techdoc/ucs/interoperability/matrix/matrix.htmlhttp://www.vmware.com/resources/compatibility/search.phpRead carefully through all the recommends and update e...

Timo Scheller · 09-22-2014

Hi,question, why would you do this?The FI will handle a failover, if you have choosen it correctly on the FI by itself. Will save you the trouble of teaming and stuff on the OS side.We do this with our Linux-Hosts on B200-M3. Works quite well. The se...

Member Since	‎05-15-2013 06:48 AM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	24
Total Helpful Votes Received	10

User Statistics

User Activity

FCPIO_TIMEOUT with ESXi 5.1 and 1.5.0.45 fnic driver

Sles11 SP2 on C220-M3 vNIC errors

Hi,

Hi,we did that upgrade in

Hi Walter,i see your point.

Hi,just take this two sites

Hi,question, why would you do