About wanstor

wanstor · 11-17-2017

Hi Is there a way to transfer firmware to the ASA using REST? Either through specifying a location to boot in the configuration or uploading the file? Thanks in advance

wanstor · 11-02-2017

Hi all, Does the CSR support L2Tpv3? Specifically we want to terminate Meraki SSID L2TPv3 tunnels into a central location. If a CSR doesn't support this what would anyone suggest as a viable option? Thanks in advance

wanstor · 06-09-2016

Hi, i've noticed that there is a deployment guide for this in VMWare and AWS but any part number info or anything else is very thin on the ground. Am I right in thinking this is a combined ASA/Firepower as in the FTD that can be deployed as a VM? I...

wanstor · 05-06-2016

Hi, What is the maximum response time permissable between a firepower device and the FSM? We'd like to have firepower devices managed in other contries from the same FSM. Thanks in advance

wanstor · 07-14-2015

Hi We’re looking to use NGIPSv specifically the AMP portion to protect our network. We have 8 ESXi hosts managed under vSphere. We’d like to compare having the AMP endpoint on around 300 VMs against having a network AMP. Do we need to have a Fire...

wanstor · 11-02-2017

The restrictions under https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-16/ce-xe-16-5-book/ce-L2-EoGRE.pdf say that L2 EoGRE is not supported on the Cisco CSR1000V platform. Is there another type of EoGRE? Thanks

wanstor · 04-03-2017

@DAVID Did you ever get a fix to this?

wanstor · 07-01-2016

I managed to get hold of the part numbers: L-FPRTD-V-T= L-FPRTD-V-T-3Y L-FPRTD-V-TM= L-FPRTD-V-TM-3Y L-FPRTD-V-TC= L-FPRTD-V-TC-3Y L-FPRTD-V-TMC= L-FPRTD-V-TMC-3Y L-FPRTD-V-AMP= L-FPRTD-V-AMP-3Y L-FPRTD-V-URL= L-FPRTD-V-URL-3Y

wanstor · 06-10-2016

Hi Jetsy, Thanks for the info however thats the FTD and I'm wondering specifically about the FTDv like this http://www.cisco.com/c/en/us/td/docs/security/firepower/quick_start/vmware/ftdv/ftdv-vmware-qsg.html Unfortunately getting info from Cisco ...

wanstor · 05-06-2016

Thanks for the prompt response however I'm specifically looking for the round trip delay in terms of 30ms for example. If the device is roughly 70ms rount trip does this have any adverse effect on anything? Thanks

Member Since	‎01-17-2006 02:28 PM
Date Last Visited	‎09-06-2023 12:27 AM
Posts	17
Total Helpful Votes Received	15

User Statistics

User Activity

ASA REST File/Firmware Transfer

L2TPv3 CSR

FTD Virtual

Firesight to device maximum latency

NGIPS AMP

Re: L2TPv3 CSR

@DAVID

I managed to get hold of the

Hi Jetsy,

Thanks for the prompt