I have a Cisco 1117-4P router in my design. Does anyone have any real life power consumption and heat output figures? All the cisco.com website gives me is the power supply spec of 66W, but I suspect that this is a huge over estimate.
Hi
We want to deny all outbound web access except to a group of about 10 whitelist URL domains on an ASA 5525-X with FirePOWER services. Is it possible to do this on the ASA without an add-on FirePower license? Will this have a significant performanc...
I'm confused why a H.323 gatekeeper deducts 128kbps from the bandwidth pool for each G.711 call, which only consumes 80k, and then only deducts 16k for a G.729a call, which actually consumes 24k. Does it mean that a H.323 gatekeeper is useless for en...
I've been asked to provide Internet Watch Foundation filtering on a router facing off to an ISP. This is a list of 8-900 URLs which is updated daily. Could this be done using NBAR on the ASR1000 or 9000? Has anyone done anything like this before? I'm...
Has anyone used low end Buffalo or QNAP NAS boxes for backing up CUCM? I can get a Buffalo 1TB unit for $200, and it alledgely supports SFTP with a simple configuration tweak, but is it compatible with the Cisco SFTP client? I'd be interested to hea...
Thank you very much for your suggestion. Unfortunately it doesn't work in our case because we have multiple target hosts within a domain, which need to be expressed as a wildcard - for example *.anynet.network.com . As the FQDN is based on a DNS look...
Hi ChrisThat doesn't make sense. The codec rate of G711 is 64kbps, which means an IP bandwidth of 80kbps @ 50 packets per second including the IP headers. The codec rate of G729a is 8k, which has an IP bandwidth of 24kbps @ 50pps. So if you were usin...
For the immediate problem of re-routing to a backup gateway, you could have a work around using an auto-attendant - a number of products including Unity and UCCX can do this quite well. The redirected call would be landed onto a common pilot number, ...
