Hello In our Clientbased - VPN with AnyConnect 4.3.02039 an ASA 5500-X Series with 9.4(3)12 we have to optimize the cipher suites. Before we had the 3.x Client only supporting TLS 1.0. Now we changed to TLS 1.2 only an tried to configure more secure ...

Hi AllWe assign in our IPSec VPN the tunnel-address from our centralized dhcp server pools.In the profile we have two server's ip configured.In test (whireshark) we noticed that the discover always go to the first configured ip.I do not understand an...

Hi I got a new Cisco 3845 under my adminsitration.For some special events I do automated actions (e-mail's) from Cisco Works 2000.One is if power supply fails.Problem now is, tha a ps fail message will be repeated every 20 seconds to syslog server - ...

Hello We are testing the AnyConnect VPN Client to replace legacy IPSec VPN Client 5.0.x.We could setup the connections with SSL and IPSec (IKE v2).Now we have to decide which ist the better method.What is your experience or suggestion ?Thanks for any...

HelloWe are Migrating some VoIP - Servers from old Cat 4506 Switch to Nexus Infrasrtructure.For the Voice-Servers we colour voice trough the network.We configured same way as on 4506. On 4506 we can check matches in ACL to prove that configuration fi...