About anshu1987

anshu1987 · 01-22-2014

Hi,i face an issue with call back. My scenario is CWMS - SIP - CUCM - H.323 - 2911 - PSTN - External Number.If i press1 to join the Meeting the System doesn´t recognize the DTMF tone. If i call in with an external Number it works fine. Call back to C...

anshu1987 · 11-20-2012

Hi Community,our Costumer need a solution for Call Manager Integration with MS Lync. He has a CUCM with hard Phones, Presence Server and a Microsoft lync. The Call Manager is connected over SIP to the MS Lync Server. So the Costumer dont want the RCC...

anshu1987 · 01-17-2019

Hi Jamie, if TRP is enabled is there a possibility to allow devices in same location to do direct RTP? Thank You Anshu

anshu1987 · 02-06-2014

Hi Oliver,yes i fixed my problem. It was a missing statement in the Voice GW. You need the "incomig called-number ." statement in the Voip Dial Peers. After that it should be work.Anshu

anshu1987 · 01-22-2014

Hi Dejan,the call flow is the same. Incoming calls are going trough the same GW. The configuration changes in the SIP Trunk and GW were also not successful. Anshu

Member Since	‎11-26-2009 07:32 AM
Date Last Visited	‎01-31-2021 10:40 AM
Posts	9
Total Helpful Votes Received	5

User Statistics

User Activity

WebEx 1.5.1.323.A CUCM 9.1.2.x Call back DTMF issue

UC Integration for MS Lync 2010

Re: Call Flow for internal calls

WebEx 1.5.1.323.A CUCM 9.1.2.x Call back DTMF issue

WebEx 1.5.1.323.A CUCM 9.1.2.x Call back DTMF issue