About dcamarotto

dcamarotto · 06-30-2015

I have two switches configured as follows: (C3750X), Version 15.0(2)SE8interface Vlan202 description Rede_X ip address 186.230.4.62 255.255.255.240 standby version 2 standby 1 ip 186.230.4.59 standby 1 priority 240 standby 1 preempt glbp 202 ip 186.2...

dcamarotto · 03-10-2015

Estou precisando fazer um SNAT dos meus servidores para o endereço VIP do ACE (endereço aonde os usuários requisitam serviço balanceado). Alguém sabe qual é a melhor forma de implementar isso? Alguém já fez desta forma? Pergunto porque esta configura...

dcamarotto · 04-05-2013

I need more space to store reports that the CM generates. Then I am changing Sybase database that is bundle to the CM and placing the MySql. Everything has been configured as the Cisco documentation indicates. I understand that the communication wi...

dcamarotto · 05-06-2008

I do not obtain to apply a access-list extended in a physical interface. Command IP access-group does not appear inside of the physical interface.

dcamarotto · 09-05-2022

1.3.6.1.4.1.9.2.1.57.0 CPU utilization for one minute1.3.6.1.4.1.9.2.1.58.0 CPU utilization for five minutes1.3.6.1.4.1.9.2.1.56.0 CPU utilization for five secondsSorry for the 6 year delay in this answer, but I just saw this question today.

dcamarotto · 07-13-2017

Hi Reza, Can you tell if Cisco today has a command that causes the 4500x switch to auto-recover? I believe that this behavior of not having auto-recovery only happens with the 4500x switches.

dcamarotto · 08-04-2016

HI Paulo, I could test the AVC software and it does not even come near granularity of information that the SCE does. Unfortunately, it seems that the AVC can not be used in large environments because of this reason. RIP SCE :-(

dcamarotto · 03-08-2016

Hi, I am same problem, but I search in my computer and not find any file with this name: AnyConnectLocalPolicy.xml. I'm try search in another locals and I find this file (C:\Users\david.camarotto\AppData\Local\Cisco\Cisco AnyConnect Secu...

dcamarotto · 11-11-2015

Hi Robert, yes. I tried v1 and grp 0 to HSRP. I put this configuration because it is a final configuration to my Customer. The software version I got the upgrade based on the version I'm right on the Cisco website. So I tried to loo...

Member Since	‎03-09-2005 05:55 AM
Date Last Visited	‎09-12-2022 07:01 AM
Posts	27
Total Helpful Votes Received	14

User Statistics

User Activity

Active HSRP does not recognize standby, but standby HSRP recognizes HSRP active.

What is the best way to make a SNAT (pat) to the servers in the ACE module

SCE 2000 / CM / MySQL - Policy string translations in CM DB not found

c2950-24 does not allow to apply access-list in a physical interface.

Re: CPU and Memory SNMP OID on Switch 3750-X and IOS 15.2(3)E

Hi Reza,

HI Paulo,

Hi,

Hi Robert,