Bob MacLean
Level 1
Level 1
Member since ‎12-20-2010
‎08-27-2019

User Statistics

  • 22 Posts
  • 1 Solutions
  • 5 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
1 Accepted Solution
10 Replies
5 Replies

User Activity

1 of the 4 WiSMs here reboots itself when the web GUI is started. The other 3 do not do this. sequence: 1. type in it's IP @ in a browser while you have a CLI session for it open 2. the CLI shows it go offline and then starts it reboot 3. obviously, ...
VOIP guy is at a conference. A dept mgr is asking for the ACD they use to have the "open hours" changed for their group that uses ACD. Running v8.5 CUCM. I can't even find ACD in CUCM or UCCX. Google comes up only with CME related answers. Is the mgr...
Users created in Qradar do not authenticate. Qradar is configured to use RADIUS and CHAP to authenticate the users in ACS. ACS v4.2 does not seem to allow a client to be configured such that Qradar must authenticate with ACS via CHAP in order to then...
This can't be right, it's on our 2951. I don't have another router to compare with, but shouldn't g0/1 have the same MAC listed for it's MAC and the bia?GigabitEthernet0/0 is up, line protocol is up  Hardware is PQ3_TSEC, address is f866.f2dd.8820 (b...
The documentation here:http://secret-epedemiology-statistic.org.ua/1587052091/ch03lev1sec1.htmlsays the reset button is:a multifunction switch. It provides the following functionality: If pressed longer than 1 second and less than  5 seconds, the sys...
Community Statistics
Member Since ‎12-20-2010 10:55 AM
Date Last Visited ‎08-27-2019 06:58 AM
Posts 22
Helpful Votes Given To