About AberDino365

AberDino365 · 05-09-2013

Hello all,A while ago I purchased a Cisco WAP121 for dedicated use by my two 802.11n laptops only, hoping to enjoy maximum speed for transferring files etc. All other devices use an older 802.11b/g access point. I live in a remote area so there are n...

AberDino365 · 09-29-2013

Hi Eric,After my last post I purchased an access point from a different vendor and it operated in 'auto' 40 MHz mode without any issues. I left it like that for a while until I noticed a few days ago that firmware upgrade 1.0.4.2 was available for th...

AberDino365 · 06-11-2013

Hi Eric,Just had a look at Wi-Spy and although it looks interesting, as a home user I'm not planning on spending that amount to do a test. Also, I really don't think interference is the issue because when I switch the 1130AG 802.11g radio off, the WA...

AberDino365 · 06-11-2013

Hi Eric,I was just having a look at the latest firmware release notes and as a resolved issue for the 1.0.3.4 firmware it states:"CSCub46649—While operating WDS Bridging using a 2.4 GHz band with a 20/40 MHz channel bandwidth, the WDS links may disco...

AberDino365 · 06-10-2013

Hi Eric,I'm in the UK, so channel 13 can be used here. However, based on the advice from "Scott Fella" I put it back to 11. Not that it matters because there is nothing else operating near that frequency.Pieter

AberDino365 · 06-08-2013

Hi Eric,I've not had a chance yet to try a different 802.11n access point in my environment, however, what I did do as a test is disable the 802.11g radio in my other 1130AG access point to see if it makes any difference. Interestingly, the WAP121 do...

Member Since	‎04-09-2013 01:12 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	13

User Statistics

User Activity

WAP121 40MHz Operation

WAP121 40MHz Operation

WAP121 40MHz Operation

WAP121 40MHz Operation

WAP121 40MHz Operation

Re: WAP121 40MHz Operation