About markcarat

markcarat · 04-22-2014

HelloWe have a few Cisco 7965 phones that tends to reboot on its own. it rebooted when user on the phone and the call was dropped.We suspected the phone renew its IP that caused the phone to reboot. Does anyone have similar issue? The DHCP lease is ...

markcarat · 10-14-2013

HelloI have two Cisco UCS server C210 M2 at our datacenter. One of them has three VM host (two Callmanager 8.5.1 and one Unit connection). The other C210 M2 has two VM host (Callmanager and Unity connection). We are in the process of moving our da...

markcarat · 06-11-2013

HelloWe have two Callmanager clusters. Both of them is running version 8.5.1. Let say cluster A has 15 remoote sites and cluster B has 4 remote sites with a total of about 200 7965 phones. I want to move these 4 remote offices from cluster B to Cl...

markcarat · 04-18-2013

HelloWe have a CM cluster running Ver8.5.1 with a SIP trunk. We setup multiple CSS and translation to block certain inboound calls base on the calling party number. It has been working fine. We run into an issue lately. We have a client who compl...

markcarat · 12-17-2012

Hello,We have a Callmanager cluster 8.51 in NYC and trying to set up IP Communicator at our Hungary office. They will be using NY DIDs, so their inbound and outbound calls will be routed over to the PRIs at NYC. What is the max latency or cisco rec...

markcarat · 04-24-2014

Hi This is what I got from the syslog 89621: USNYC1CCL02 Apr 22 2014 17:02:43 UTC : %UC_CALLMANAGER-6-StationConnectionError: %[DeviceName=SEP8478ACE7B3BF][ReasonCode=8][ClusterID=StandAloneCluster][NodeID=USNYC1CCL02]: Station device is closin...

markcarat · 04-24-2014

The phone is on a power brick and the phone is connected to a Juniper switch

markcarat · 04-23-2014

Under network statistics, it said "|initialized' From RTMT|2,100,50,1.127624930^10.108.6.18^SEP8478ACE7B3BF |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] BuiltInBridgeControl(2,212,17201) SsType=0 Partition= Number=b00221217201001 DialPlan= StatIndex=67460664101835...

markcarat · 10-20-2013

HelloThe V2V worked fine. License mac didn't change. Basically I shut down CM and UC. Let our Server team do the cloning.When it was done, i fired them up. Everything works without a blip.thank you everyone.Mark

markcarat · 10-18-2013

Thank you Michael and George. How do we handle the Liceense mac? Will I get a new mac address and ask Cisco to rehost the licenses?RegardsMark

Member Since	‎10-28-2007 06:15 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	117
Total Helpful Votes Received	20

User Statistics

User Activity

Cisco IPphone rebooted itself

UCS Server V2V

Bulk delete ITL file

"Restricted" Calling Party ID

Latency between IP phones and Callmanager

Hi This is what I got from

The phone is on a power brick

Under network statistics, it

Re: UCS Server V2V

UCS Server V2V