About Ahmad Basel Jaber

Ahmad Basel Jaber · 08-08-2011

IntroductionTopology overviewCatch-All with forward option:Catch-All with non-transparent serverfarm:Catch-All with transparent serverfarm:Catch-All with out-of-service transparent serverfarm:References IntroductionIn one-arm mode, you configure the...

Ahmad Basel Jaber · 08-02-2011

IntroductionTopology overviewVersionACE ConfigurationScenario IntroductionCisco ACE modules support virtualized architecture to increase datacenter scalability. You can create upto 250 virtualized contexts on an ACE module. Cisco ACE working as loadb...

Ahmad Basel Jaber · 09-28-2011

Hi Joseph,Can you get sniffer traces from the server while the ACE is probing it? When you mentioned that you are telneting to the server, were you GETting /cgi-bin/ERMS-PREP-statusRepo.cgi to get the HTTP200 Ok message you provided?Best regards,Ahma...

Ahmad Basel Jaber · 09-07-2011

Can you reset the WCCP session between the Ironport and the 6K, SPAN the interface where the Ironport is connected, re-establish the WCCP session and collect the captures in pcap format, then upload them?!Can you get the show ip wccp commands from th...

Ahmad Basel Jaber · 09-07-2011

Hi Thorr,Keep using the routed mode but NAT/PAT the clients' IP addresses for this specific requirment.Best regards,Ahmad

Ahmad Basel Jaber · 09-05-2011

Hi Thorr,Dynamically NAT or PAT the client IP addresses to guarantee the traffic is passing through the ACE in the way back.Best regards,Ahmad

Ahmad Basel Jaber · 09-01-2011

I usually configure the probe (including the URL I need to test) apply it to the server farm, then check the show probe detail, it will show you the "Last status code" then configure it under the probe. Otherwise, you will need to capture the traffic...

Member Since	‎05-16-2011 03:43 AM
Date Last Visited	‎05-21-2018 04:42 AM
Posts	61
Total Helpful Votes Received	4

User Statistics

User Activity

Catch-all VIP with forward or transparent serverfarm options

ACE behavior with static sticky and rserver down situation

HTTP probe issue with expect regex string

Problem redirecting HTTPS trafic using WCCP on a Cisco 6509

ACE in routed mode design

ACE in routed mode design

ACE: how do I check what status code does URL returns