About heiki saaver

heiki saaver · 03-03-2015

Hello. A CSR1000V is having noticable packet loss on a network. I may have found the counter indicating the packet loss occuring, but I dont know the actual cause for the packet loss. The command:#show platform hardware qfp active statistics drop det...

heiki saaver · 03-31-2014

Cisco Adaptive Security Appliance Software Version 9.1(4); Device Manager Version 7.1(5)100; anyconnect-win-3.1.05152-k9.pkg Hello, I am trying to implement Certificate Matching for certain client profiles. However 'certificate matching' does not see...

heiki saaver · 03-04-2014

I am running:Cisco IOS XE Software, Version 03.11.01.S - Standard Support ReleaseCisco IOS Software, CSR1000V Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 15.4(1)S1, RELEASE SOFTWARE (fc2)using license:License Level: premiumLicense Type: Evalu...

heiki saaver · 02-11-2014

Hello. I am running c3750-ipservicesk9-mz.122-55.SE8.bin on my switch and I'm tinkering with netconf.The netconf session is set up and im sending this query to the switch:<?xml version="1.0" encoding="UTF-8"?><rpc message-id="101" xmlns="urn:ietf:par...

heiki saaver · 02-06-2014

Hi. Can anyone explain to me what exactly is the "Disable Automatic Certificate Selection" supposed to achieve?My theory is that upon connecting to a VPN gateway (ASA) I am given an option to select the certificate I would like to use for authenticat...

heiki saaver · 03-04-2016

Update- got my problem resolved. I discovered I had asymmetric routing toward my VPN peer. It seems that the tunnel is established fine over an asymmetric route, but IPSEC packets are dropped. Just make sure that the ingress and egress route for the ...

heiki saaver · 03-02-2016

Hello. Any updates on this matter? I am having the same exact problem with two ASA5550 doing site-to-site ipsec tunnels. Both ASAs are running 9.1(7)4 software (asa917-4-k8.bin). One side has only Tx counters increasing and Rx at zero, and the other...

heiki saaver · 09-25-2015

Hi. Any updates on this issue?

heiki saaver · 09-25-2015

Sorry for the late reply. I did not resolve it. I also haven't had time to play with it more. Maybe I will come back to it some time and try with newer Catalyst software.

heiki saaver · 03-27-2015

Same problem here with N1kV version 5.2(1)SV3(1.2). 5 minute input rate 1951392 bits/second, 3233 packets/second5 minute output rate 61691180064 bits/second, 5103193 packets/second Actual traffic is 500-600Mbit/s, but the output shows 60Gbit/s :D

Member Since	‎09-14-2012 11:28 AM
Date Last Visited	‎04-01-2020 04:53 AM
Posts	44
Total Helpful Votes Received	15

User Statistics

User Activity

CSR1000V packet drop

Anyconnect VPN Certificate-matching not working

How to enable onePK on CSR1000V?

Netconf weird output

Anyconnect "Disable Automatic Certificate Selection" not working

Update- got my problem

Hello. Any updates on this

Any updates on this issue?

Sorry for the late reply. I

Same problem here with N1kV