I think I already know the answer to this.Will an SFP-10G-SR work in the 4G model if the interface is set to 'speed 1000' ?It currently keeps err-disabling in the 9200, even with speed at 1000I have a 9200 connected to a CBS350 (which I am sure will ...

We have an ASA in AWS and it has 2 VPNs, 1 to AWS (subnet A) and 1 to Azure (Subnet B)All traffic from the ASA to subnet B is source NAT'ed, so we never have to change or add subnets when going to subnet B.Subnet Z is on the inside interface of the A...

This one has me pulling my hair out, as I already have similar ones working.So we have a site to site VPN between Cisco ASA and AWS. The requirement is for an Anyconnect user to connect to the firewall and then for the tunnel to the Redshift subnet t...

I know there are lots of articles out there, but I could not find a definative answer on this.We need to run DMVPN, EIGRP and Zonebased FW on our routers.Do we need DNA essentials or advantage for this ?

I am having an issue that does not look uncommon for 4331'sWe have taken over a circuit in an office and this circuit will connect fine to other types of router or modem.They will pick up the dhcp but perminent assigned IP address with no issue, as t...