Hello everyone, Has anyone upgraded the IPVC 3545 MCU Software? According to the documentation I have to download UpgradeUtility.exe from the Cisco Unified Videoconferencing Software CD-ROM. There is no such file in my CD. When I install the CD on m...
Hello everyoneA have a below scenario:Network A --- CUCM (7.1.3) ------>SIP Trunk ----->CUBE<--------SIP Trunk<----------- CUCM(7.1.3) ---Network BI also have a hardware video conference bridge (IPVC-3545-MCU) in network A. CUBE is set for media flow...
Hello everybody,I've created some translation rules on CUBE so that some IP phones will not be able to call some certain outside numbers, they are rejected/blocked on CUBE. The system works fine. I don't know if there is a logging system on CUBE whic...
Hello everybody,If you have a hardware conference bridge, does it make any problem to turn off the "IP Voice Media Streaming App" service? If I am not wrong, if you turn this service off, software conference bridge stops working. Thanks,Fatih.
Hi Dejan, Thank you for the response. I already downloaded the CD (Cisco Unified Videoconferencing 3500 Series Utilities CD_140506_CS.zip) from there (https://software.cisco.com/download/release.html?mdfid=280648119&flowid=7621&softwareid=282100262&...
Thank you very much Jagpreet and Joseph.So I have to either upgrade the Call Manager to the version 8.6 (or higher) or use an IOS MTP. Can you please tell me what would be the minimum requirements for IOS MTP? What kind of router shall I use (is 2800...
Hello Jeroen,I have almost the same problem. Did you find a solution? If I chose media flow-around in CUBE it works fine (But I need media flow-through). Did you try to use media flow-around?Thanks, Fatih
Another (but much less complicated) problem I have is:When there is a successful video call between user A (in network A) and user B (in network B), if user A pushes the "hold" button and then "resume" button a couple of seconds later, the calls beco...
Hello Paolo,Thanks for the answer. I've found examples of how to use COR on CME, but I couldn't find any example for CUBE. For CME, you can assign the COR to the ephones but how can I do that for a specific group of numbers on CUBE? Do you have any i...
