Hi folks, Recently i have started observing some issues in HSRP Failover, please find attached Network Infrastructure for the same.So if you look at the diagram, we have dual local loops and dual routers to achieve Link as well as router ...
Folks, I have deplyed Cisco 6921 IP Phones in our production Environment. We are using CUCM v8.5. I have assigned individual user names against ephone-dns. When some one calls a number from his/her extension, he is able to see the dialled num...
Guys, I am working on CUCM 8.5 version in our environment. Recently we have got a new request for enabling Voicemail for every Ephone-DN and a GDM for Hunt Groups. On some googling, i found out that Cisco Unity Express modules integrate wi...
Hi Folks, I have applied policy based NAT on one ASA firewall. Assume that Source Inside Network is 192.168.1.0 and destination (Outside) network is 192.168.2.0. Now using Policy NAT i am translating source Subnet 192.168.1.0 to a global a...
Hi Folks, I am trying to establish routing between two Site to Site vpn tunnels, both of which are terminating on the same outside interface of my Cisco ASA. Please find attached Network Diagram for the same. All Firewalls used are Cisco AS...
But as i realized a better option would be to go for a GRE over IPSEC Tunnel as that would give me additional options like QoS, VoIP and Multicast Traffic to be encapsulated within an IPSEC. Of course its not related to my original post.
But there are two different Service Providers with whom My Routers are establishing BGP Neighbour Relationship. My Primary Router with Primary Service Provider Router and same for Secondary too. So i can understand that the Primary Service Provider R...
Hi Mikael, If the Service Provider Router looses my local LAN Route when the Primary Router goes down, then why do i still see the BGP neighbour relationship and also how am i able to see the Default Route through BGP.Also FYI, My Primary ...
My Routers learn default Route from Service Provider Routers using BGP Sessions. The Switch is a plain L2 Switch and does not even have a L3 interface or Routing protocol running on it.