mvsheik123
Level 7
Level 7
Member since ‎06-03-2006
‎10-26-2020

User Statistics

  • 1471 Posts
  • 135 Solutions
  • 214 Helpful votes Given
  • 362 Helpful votes Received
Recent Badges
300 Helpful Vote
100 Helpful Vote
50 Accepted Solution
15 Accepted Solution
1 Accepted Solution
5 Accepted Solution
 30 Helpful Vote
10 Helpful Vote
1 Helpful Vote
50 Replies

User Activity

Hello experts,   After IOS XE version 3.7.X for Sup 8-E (and 8L-E) the naming convention showing: CAT4500e SUP8e /L-E Universal Image: Same size. So the same image fits on both sups?   Thanks in advance MS
Hello experts, Question 9.x Nat. ASA sample configuration below.. ! inter Eth0/0 nameif OUTSIDE Sec-level 0 ip address 1.1.1.10 255.255.255.0 ! ! inter Eth0/1nameif INSIDESec-level 100ip address 192.168.100.10 255.255.255.0!object network TEST1host 1...
Hello experts, Planning to upgrade Active/stdby pair from 8.2.x->8.4.6->9.1.10. ASAs got reqd memory. Also, the config got only couple of 'nonat' statements and related VPN configs. Can I upgrade pair to 8.4.6 first (standard method) and once all loo...
Hello experts, One question on ASA 9.x (or post 8.2) Nat- Scenario: 2 internal hosts PAT'd one public IP (not interface IP). Users from internet able to reach one of the hosts on 'https'. What is recomended config?  Object network TEST  subnet 192.16...
Hi all,Testing with BGP peering over IPsec tunnel with ASA new code.L3 switch with basic BGP config -> ASA1 (code 8.2) <--L2L tunnel-->ASA2 (code 9.2.x) with BGP config.Trying to form BGP peering L3 switch IP and ASA2 LAN IP (with pvt AS#). I can pin...
Community Statistics
Member Since ‎06-03-2006 07:00 PM
Date Last Visited ‎10-26-2020 06:42 PM
Posts 1,471
Total Helpful Votes Received 362