Hello community !I am trying to perform a very specific thing.I would like to perform a PBR for a subnet range located remotely. However one of the IP of this subnet is configured locally on the router (interface IP @) !I know that PBR takes preceden...
Hello !I have been researching but did not find a straigh way to do this : I have 3 SSID => A, B, C.Is it possible to hide (not disable) an existing SSID (let's say B) just on specific APs ? As per my understanding the option "Broadcast SSID" is only...
Hi, We are going to deploy a lot of new LAP. For each site our customer will give us an excel file with the MAC @ of the AP and the target name.I was wondering if it was possible to automate the injection of this file "mac <-> ap name" and then ap...
Hello, I am having some question around Prime Infrastructure 1- Does a general document exists regarding the licensing count of monitored devices ?Indeed I am wondering about the specific points. Is it true that :- A 3750 stack unit count as one (for...
Hi, I am currently testing Prime Infrastructure 1.3 especially for the Assurance feature. So I have downloaded the image and installed the tool with a Demo license.I have configured some Catalyst4500 - IOS 03.02.00SG (15.0.2SG) to send some Flexible ...
Hello Jody,Sorry for my late reply but thank you very much for your confirmation and clarification.I understand there is no way in this situation for the PbR to work => The flow will be punted to the CPU and the interface will recognize its IP anyway...
John, thanks for your inputs.Indeed I understand what you say. In fact the reason is simple : An error occured on subnets allocation.An already used range (subnets used to address some specific GRE tunnel interfaces on multiple routers [subnet in Ora...
Hello Vasilii, Many thanks for your answer and precision about "ip local policy ..."In fact I need to do PBR on flows coming from the LAN (the PC in the diagram) not from the router itself. My challenge is perform PbR on incoming flows for an IP @ ...
Hi Scott, Thanks for the additional information!Yes, I will proceed like this. I will create the new SSID D (>16) with a Different NAME – with Broadcast Disabled - and associate it to the same WLC Interface/Interface Group. Then configure the AP Grou...
