Hi Community,
I have many ISR4431 hitting this Bug CSCwf53555.
At first they was running with 16.6.4, the we upgraded to 17.9.3a and then hit the bug (PID: ISR4XXX-PWR-UNKNOWN, VID: , SN:)
Then we try with this:
- Rollback to 16.6.4: here the output ...
Hi all,
I upgraded some Cisco ISR4431 from 16.6.4 to 17.6.5, an after that some ISR4K hitted with CSCwf53555.
NAME: "Power Supply Module 1", DESCR: "Unknown Power Supply"PID: ISR4XXX-PWR-UNKNOWN, VID: , SN:
Then I changed to 17.12.1a because in CSCwf...
Hi All. This is is to ask if you had this issue in order to help me with your experience.I was trying to upgrade CT2504 from 8.2.151.0 to 8.3.150.0 but when the copy is finished, either TFTP o SFTP, by CLI or GUI, fails and ends with this message: "F...
Thanks Leo.
Unfortunately, it did not solve the issue.
I had a chance to swap the PS's and, always, the PS in slot 0 appears with right PID and SN in "show inventory" but the PS in slot 1 appears a "UNKNOWN" in "show inventory".
Thanks for your reply...
I had same issue but another situation: [Cisco Switch PoE 802.3af] ------ [PWRINJ6] ----[AP3802 Capwap mode] With interface at switch side with PoE enabled: brain: Power mode: Degraded/Reduced Power, power_detection: DC_adapter(FALSE), 802.3AF_POE(T...
Hi All. Thes issue is solved. I go to the other suggested Cisco IOS: 8.5.140.0Upgrade from 8.2.170.0 to 8.5.140.0 was successfull. Thank a lot for your help. JorgeNote: upgrade from 8.2.170.0 to 8.3.x doesn´t work.
