About frank

frank · 02-20-2014

Can anyone help to show me how to use snmpset to change the tacacs server IP address for a 3925 router?I got the syntax as "snmpset -v 2c -c "string" "3925-ip" 1.3.6.1.4.1.9.5.1.16.9.1.1" but was getting "No Such Object available on this agent at thi...

frank · 08-05-2009

I have "maximum-paths" configured and seeing two entries in the RIB for remote prefixes at the hub core 6500 (it has two EBGP connections to two CE from 2 carriers each).The remote site has 2 CE routers connected to two carriers, one carrier each, an...

frank · 07-07-2009

Is it possible to associate object tracking IP SLA with BGP conditional advertisement?If I only use the BGP conditional advertisement then I will still need to wait for the route timeout but the user application can't wait that long so I am wondering...

frank · 06-03-2009

The router is not allowing me to add QOS service policy under Ethernet subinterfaces in a VRF-life setup on 7206.Would QOS work for all the VRF if I create multiple classes for each VRF under one main policy-map and apply to main interface?

frank · 03-15-2009

Two routes have EIGRP neighbor established over GRE interface but they are not learning the full routes in its neighbor's table.Here are the config and show:<old-denhav1012>!router eigrp 113 redistribute connected route-map deny_connected network 10....

frank · 08-05-2009

Seems our case is 99-1 load-sharing and one of the remote circuits is saturated.I have done 20 traceroute from hub to remote and it is always taking the same path, how can I prove to the customer that load-sharing is really working?I have show them t...

frank · 08-05-2009

Thanks for the reply.Then in this case would CEF switch to another path if the BGP best path never change for the same source and destination sessions?If the answer is no then "maximum-paths" we have is really not doing anything, correct?Here are som...

frank · 07-08-2009

Edison,Yeap, what a coincident that one of our guys talk about GRE end-to-end then we go further for EBGP multi-hops end-to-end and tune the timer very low...I think it is a better way instead of doing tracking with conditional injection.I will test ...

frank · 07-08-2009

Yes, we think about that but the PE from carrier doesn't allow the BFD and it is not local outage but someing inside the cloud so we are looking for end-to-end tracking to influence the routing.

frank · 07-08-2009

Giuseppe,Thanks for the reply.We are facing some outage inside the MPLS cloud and is not local circuit outage and the customer want to fail to their backup circuit ASAP instead of waiting for BGP timeout... We have tuned the BGP advertisement interva...

Member Since	‎02-09-2003 07:32 PM
Date Last Visited	‎03-06-2021 06:06 PM
Posts	116
Total Helpful Votes Received	5

User Statistics

User Activity

How to use snmpset to change the tacacs server ip for 3925?

6500 BGP Load-Sharing Questions

Is it possible to associate IP SLA with BGP conditional advertisement

VRF-Lite QOS on Ethernet Subinterfaces

Why EIGRP is not learning all the routes?

Re: 6500 BGP Load-Sharing Questions

Re: 6500 BGP Load-Sharing Questions

Re: Is it possible to associate IP SLA with BGP conditional adve

Re: Is it possible to associate IP SLA with BGP conditional adve

Re: Is it possible to associate IP SLA with BGP conditional adve