Dan Muntz
Level 1
Level 1
Member since ‎06-20-2012
‎08-18-2017

User Statistics

  • 16 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received
Recent Badges
10 Replies
5 Replies

User Activity

On SG500, SG300 and SG200 series switches, SNMP is painfully slow.When I snmpwalk the switch, it dumps about 30 to 40 entries, pauses for a second, then dumps another 30-40 entries, pauses for a second, etc.Multiple snmpget requests cause the snmpget...
Wireless LAN controller Application Visibility and Control question.How can I add an entire application group at once instead of having to add every single application name under that group?I want to mark all packets that fall under "voice-and-video"...
Using an SRP251W-U firmware 1.2.5I have two ports forwarded, one is a straight forward for port 22 to the local LAN server.  The other is a port forward for external port 81 to internal port 80 on the same LAN server.Using Network Setup -> Firewall -...
I upgraded our 509G phones from 7.5.2b to 7.5.4 and immediately noticed that the CallerID CNAM on inbound calls is truncated more than it was with the older firmware.With 7.5.2b an incoming call would show:From: SOME CALLER IDWith 7.5.4 an incoming c...
I need to setup the following:ALL traffic FROM internal IP of 10.0.0.1 needs to be seen on the internet as the public IP of 204.0.0.1ONLY ports 80 and 443 FROM 204.0.0.1 need to be sent to the internal IP of 10.0.0.1I've tried NAT with route maps, bu...
Community Statistics
Member Since ‎06-20-2012 10:49 AM
Date Last Visited ‎08-18-2017 04:01 AM
Posts 16