Hi there.I've tried upgrading from 16.3.6 to 16.9.5 on a 3850 stack but I get following error output: us2sw01# file flash:cat3k_caa-universalk9.16.09.05.SPA.bin to flash:[1 2]: Expanding file: Verifying parameters: Expanding superpackage flash:...
Hi all.On one of our switches (it's a stack made of 5 2960x-48fps and fpd switches) I see this: hulc_dlp_asic_s88gs_handle_10g_linkchange 3789: Invalid s88g_xg_mac_info address (switch013-3)(switch013-3) I tried googling, didn't find anything.Is anyb...
I'm running a 2-member stack 3850 with 3.7.5E
Now the recommended OS seems to be Denali-16.3.7
Is there any particular procedure to upgrade from 3.7.5E to Denali-16.3.7?
Thanks in advance,
What's the correct timezone configuration for Houston timezone?
I thought it would work with:
clock timezone CDT -5 0clock summer-time CDT recurring
But this is not quite correct, as the clock is 1 hour ahead.
What is wrong there?
I am experiencing weird behavior on a 3 member stack made of C3850-48P switches.
I am seeing quite a lot of STATIC MAC address entries even though no such entries have been manually configured. The fact is, that I connected my laptop to Gi2/0...
Hi John.Sorry for re-vamping an old thread...I'm experiencing the situation where the Cisco Catalyst 2960X is suspending not only the port (which does not receive LACP PDUs, but is anyway active) but the whole EtherChannel!Do you think that the "no p...