About andypenning

andypenning · 01-29-2018

Who can I talk to about a Trustsec implementation? Should I open a TAC case or is there a better way to engage Cisco's team for help?I'll try to explain how we intend to use Trustsec here. We have wireless users with WPA2 Enterprise and MAB. ISE retu...

andypenning · 06-08-2016

I am working with a customer who is the registered DA for their company. The user has access to the STNC portal. When they go to Library > All Collectors > Actions > Generate a new CSP-C entitlement, a window pops up with the message "Error logging i...

andypenning · 06-01-2016

Hello, When I issue "show ip" at the collector console I notice there are 5 DNS Servers configured. But the two servers that I entered during the setup are #s 4 and 5. What are the other name servers and is it advisable and/or possible to change the ...

andypenning · 02-25-2016

Is there a difference in the contract information that I will be able to see on the portal between two devices on my network, in the following scenario? If so what visibility do I have in both? Device1 is registered with my CCO ID. Device2 was regist...

andypenning · 10-04-2011

Is it possible for a lightweight access point to dynamically register with a DNS server after it gets assigned an IP addresss from DHCP (create and update an A record with current IP address)? I would like to be able to monitor the Access Points usin...

andypenning · 02-01-2018

Vince, thanks for your help! It appears to be working, I've got the PAC and environment data. I was missing some RADIUS config. Thanks again!Andrew

andypenning · 01-31-2018

Hi Vince,Thank you for the response. I appreciate that TrustSec is not a simple setup. I've been reading up on the design guides but didn't know about the labminutes videos so I will check them out. But again, we are not pushing the policy/matrix/SGA...

andypenning · 02-25-2016

Great, thank you!

andypenning · 03-11-2015

Thanks for the workaround!

andypenning · 09-10-2013

There is a patch for this. Below is info on the 1.3 patch:Description:Apply this patch over existing Prime Infrastructure 1.3.0.20 to fix the issue introduced in Google Chrome 29 build, which broke Dojo Toolkits query interface.Release:1.3.0Release D...

Member Since	‎07-18-2007 06:55 AM
Date Last Visited	‎03-24-2020 08:11 AM
Posts	57
Total Helpful Votes Received	15

User Statistics

User Activity

Need Trustsec guidance

Error trying to register a collector

DNS Servers for the Collector

Contract info visibility question

AP register its hostname with DNS server?

Re: Need Trustsec guidance

Re: Need Trustsec guidance

Great, thank you!

Thanks for the workaround!

Cisco Prime ver 1.3 issue