About Azubuike Obiora

Azubuike Obiora · 01-29-2014

Hello Experts, I have a bit of a challenge that I would need your input on. First off I was just helping out a friend with this configuration and then he put more that I can chew write in my mouth. So I would need help to see how best i can get this ...

Azubuike Obiora · 07-17-2013

Hi Experts!Having a funny issue I'm experience, just thinking to myself what I could be doing wrong. I have 2 ASA's with software code 8.4.5 running on both of them, ASA1 is a 5510 that I have two active vpn connections on it a l2l with another ASA 5...

Azubuike Obiora · 06-14-2013

OK i know the first part of the situation is solved and I'm grateful to Jouni who elaborated me on it. But I have yet another pending situation that I could use a help here and really wouldn't mind been told this is where i got it all wrong.So finall...

Azubuike Obiora · 06-13-2013

Hi Experts,I believe this everyone is doing OK and getting along with your are doing? I have this funny scenario that happened on ASA 8.4 I configured recently for DMZ static nat. See the topology attached. I did configure the inside with a PAT objec...

Azubuike Obiora · 06-12-2013

Hi Experts,I keep getting such outcome on my sys log on the ASA, As much as I hate to say this, these are Chinese IPs, They've been flooding my network ever since today!%ASA-4-106023: Deny udp src outside:42.96.255.142/53 dst inside:192.168.200.196/6...

Azubuike Obiora · 11-01-2016

Hi Guys, I recently experienced the same issue and tried a couple of things suggested here still had issues launching the KVM on my UCSE blade, my colleague showed me what worked for me without going about this the hard way. I thought it might help...

Azubuike Obiora · 02-04-2014

Hi Abolton, Are you saying that the access-list you configured would disappear as soon as the VPN tunnle goes down and you try renegotiating the tunnel again? That's strange!Is it possible you get your config pasted in here? that might help in troubl...

Azubuike Obiora · 02-04-2014

Hi Tony, Not necessarily! It should work if you get all your configurations correctly. But I would advice that you do so! Reasons being that when troubleshooting you have the same software code running on both firewalls. It's easier to focus on one s...

Azubuike Obiora · 02-04-2014

Hi Abolton, Ok just a quick question, have you tried adding your 172.16.32.0/23 into your access list above?Extended IP access list MyEZVPN_enterprise-list 10 permit ip 10.255.255.240 0.0.0.15 any 10 permit ip 176.16.32.0 0.0.1.255 any

Azubuike Obiora · 02-04-2014

Hi Madis,I have no experience with L2TP VPN on cisco ASA but I see something that I want to point out that might help out though. nat (any,any) source static VPN-network VPN-network destination static MyNet MyNet the any any interface statement might...

Member Since	‎06-08-2012 08:40 AM
Date Last Visited	‎07-18-2018 12:03 AM
Posts	68
Total Helpful Votes Received	5

User Statistics

User Activity

Static Pat, Port forwding

5505 and 5510 l2l vpn tunnel not up

DMZ static nat Pt II

DMZ static nat!

I'm having a Beijing footprint and Scanning on my network help!!!!!

Hi Guys,

Hardware EZVPN Client

ASA Site-to-site VPN Tunnel

Re: Hardware EZVPN Client

Re: Cisco ASA 5512-x L2TP IPSEC vpn tunnel up, ping to devices w