Hi Steven,
I'm afraid it is not possible to log into an unmanaged switch - hence the name. Unmanaged switches are plug-and-play devices with no configuration options available. However the switch should forward all traffic by default. If you have any...
Hi Sam,
Well I suppose that the term recursive lookup stands for something different. Let me explain it on an example.
Here we got a very simple routing table:
172.16.0.0/24 is subnetted, 2 subnetsC 172.16.1.0 [1/0] via 172.16.2.2C 172.16.2.0 is ...
Hi,Thank you very much. According to the documentation, dynamic routing is not available, however, you should be able to make use of static routing and in your case also SVIs (multiple VLAN interfaces) which are useful for inter-vlan routing. Have yo...
Hi again :), You should be fine with static routing, just make sure that the routing is enabled.Can I ask you for the output of the following command?show ip routeIt should contain a line like this:IP Forwarding: enabled If that's the case, IP routin...
Hi,I'm not quite sure as I don't have experience with SF302-08P, but I'm afraid that you have to enable L3 functions on the switch in order to work with multiple vlan interfaces (so called SVIs). In L2 mode, you're able to use (and it seems that also...