Hi- I understand in TC7 there was a change made to how the codec reacts when a presentation source is removed. From the release notes:Presentation will stop when presentation source is disconnected If a presentation source is disconnected or goes in...
Hi- I'm running ESXi 5.5 on one SD card in FlexFlash, but would like to add a 2nd one to complete the raid for safety. Does the card need to be formatted by the BIOS setup in order to work? I tried just inserting another 16GB card, but web interfa...
Hi-I am trying to register 2 new TCS boxes to a VCS. THey both show Registration accepted, then removed in the VCS log. Reason=Registration Superseded. What does this mean, and how can I solve it? None of the Recording aliases are the same, i ...
I have a number of endpoints that are on v5, and i would like to use TMS to upgrade to v6.1. I have already downloaded the v6.1 sw and plan to upload it direct to the TMS. Is there anything else I should plan for? Will release keys be an issu...
I think you are missing the point- You are to install ESXi on the FlexFlash in the UCS. When you boot into EXSi, and try to use the RAID drive you created, ESXi will not see it. The software raid is not supported.
Nope, that is what i did and it does not work. ESXi is loaded on the FlexFlash, and works fine. When you boot into ESXi, it does not see the Raid 10 drive, it only sees 4 physical drives. We had to find a RAID card and install that, now it works ...
Hi Martin- I am the admin for the box, and using that admin account in the web interface- when you check the delete recording box, click ok, then nothing happens. You are just left looking at the recording, not deleted. No error message. Thats goo...
More info:TCS 5.3VCS 7.2.2No SIP being used, 323 only. We are troubleshooting more, must be some odd network thing happening as this should work fine. I will update when resolved. thanks
