About kevinhobson2000

kevinhobson2000 · 04-13-2015

Hi all,I have two 7K chassis running two VDC's and would like to run a VPC between them but i cant find any definitive answer if this is supported or not.I have seen the slides on the cisco live presentation where it says that the VPC domains have to...

kevinhobson2000 · 05-28-2013

Hi,This is a follow on from the sip ringing out issue.https://supportforums.cisco.com/message/3949262#3949262Topology below:CUCM -- SIP Trunk -- CUBE -- SIP Trunk -- ITSPBasically when a call is put on hold/transferred i see the invite being received...

kevinhobson2000 · 05-14-2013

Hi All,I have an issue with a sip call.Basically the phone rings but times out when calling in externally.The topology is:ITSP ------ CUBE ----- CUCMAll call legs are SIP.I have done a debug ccsip messages and it would appear that after the CUBE ackn...

kevinhobson2000 · 02-09-2013

HI All,I have a issue with throughput across a sub millisecond LES link. Topology below:Nexus3k -------------------------------------------- LES ---------------------------------------- Nexus3k | ...

kevinhobson2000 · 01-30-2013

Hi all,In the design guide when you setup the vswitch you only specify one network adapter for the vswitch. I added a second one in failover and reversed them depending on the order of the Vnics.Is this correct or should I put it back to one?I don't...

kevinhobson2000 · 04-13-2015

Hi Sean,First of all thanks for replying. i have seen this link and others Referring to a single chassis which would be an spof.But as I have two seperate chassis I do have redundancy at hw level but I do not see any verification on this.cheersKev ...

kevinhobson2000 · 06-07-2013

Sorry for the late reply pal.Been busy.I configured the CUBE as a HW MTP and it sorted it.Now no MOH even though the SIP trunk is assigned an MOH server.Im thinking maybe its because of the g729br8 codec as i dont even see CUCM invoke MOH.

kevinhobson2000 · 05-28-2013

Hi,There are now problems with supplemntary services. A debug seems to show the audio inactive messages being passed to the ITSP and the ITSP sending an ok. The CUBE then sends an ACK and the a BYE to end the call.Debug below:*May 28 15:22:22.687: ...

kevinhobson2000 · 05-16-2013

Aye mate,I already have.Thanks for the use of your eyes much appreciated.CheersKev

kevinhobson2000 · 05-15-2013

Hi,I realised after my last post that the sip was bound to the wrong interface and so it was in a different VLAN.I changed the bind to .300 and changed the ip on the trunk on UCM and bang its fixed.Cheers

Member Since	‎10-18-2005 12:16 AM
Date Last Visited	‎11-13-2019 01:58 AM
Posts	195

User Statistics

User Activity

VPC between VDC's is this supported

Sup services issue CUBE

SIP ringing out issue

Poor TCP throughput across a LES

Q about flexpod design guide 5.0

Hi Sean,First of all thanks

Re: SIP ringing out issue

Re: SIP ringing out issue

SIP ringing out issue

SIP ringing out issue