About Breeze Kuriakose

Breeze Kuriakose · 04-12-2017

Need assistance how to configure 1815w AP for POC at customer site , where i got info that i can configure mobility express and test the coverage for a customer . But i dont see an RJ45 Console port and in data sheet and software download i saw only ...

Breeze Kuriakose · 02-15-2015

Hi i am having 2911 cme router 10.5 i have uploaded the 10.5gui.tar file in flash , enabled http , dn webedit and web authentication . Still i am not able to get the gui .Also is it possible that i am having sip phones only voice register global . wi...

Breeze Kuriakose · 12-15-2014

Hi am using CUCM 10 and h323 gateway 3 PRI . I found that when i dial to mobile phone and just disconnect the call from the mobile , still the cisco phone rings . I informed that service provider is not sending the RX disconnect (disconnect signal )...

Breeze Kuriakose · 11-13-2013

Hi i have 20 access points and wlc controller with 15 ap supported .I got 5 ap license but am not able to upload . Temproray i have enabled evaluation license which is valid 12 weeks . but when i tried to upload the liecense its giving me error .Can ...

Breeze Kuriakose · 06-14-2013

Hi i have got a customer where they have existing WS-C4506-E 6 where they have few connections .Now they want to put two X2-10GB-SR the other ports where using CVR-X2-SFP .I have a doubt that if CVR-X2-SFP is using in first port then can i use...

Breeze Kuriakose · 04-12-2017

Hi I have seen steps to convert it for mobility express version from capwap . but i see only those are for 1850 2800 . In the cisco software download for mobility express i cannot see for 1815w mobility express . Do you have any idea whether cisco ai...

Breeze Kuriakose · 06-15-2013

Hi Richard Thanks for the feedback.i jut want to confirm1>> If i use 1st port CVR-X2-SFP then can i use the 2 port X2-10GB-SR or i should you in 3rd port .2>>if first 4 ports are using CVR-X2-SFP then the remaining 2 ports can i use X2-10GB-SRthe li...

Breeze Kuriakose · 05-28-2013

They want to keep there network core switch where there full network will be connected by 10 gig

Breeze Kuriakose · 05-06-2013

Hi Thanks..leolaohoo...bro can you tell me cisco has 8 port poe switch or not . And whats the model if they have ..

Breeze Kuriakose · 09-16-2012

Dear Scott Thanks a lot.....Just had a small doubt the as customer wants to keep the second WLC in one another branch its in another network .So if in that senario of i upgrade to 7.3 both WLC the all configuration will Replecate atumoatically when...

Member Since	‎01-30-2010 11:19 PM
Date Last Visited	‎02-17-2021 03:14 AM
Posts	65

User Statistics

User Activity

AIR-AP1815W-E-K9 not able to configure

cme 10.5 gui not working

Cisco Phones hears ringback even after the mobile person disconnect

wlc-2504-k9 ap license upload issue

In WS-X4606-X2-E can we use three ports for CVR-X2-SFP and three ports X2-10GB-SR

Hi I have seen steps to

In WS-X4606-X2-E can we use three ports for CVR-X2-SFP and three

6500 or Nexus switch is better for 10 backbone network

WS-C2960PD-8TT-L is a poe switch or not

Re: how to replecate all configuration to secondary wlc automati