Hello
Certain counters cannot be polled using SNMP, so for troubleshooting I would like to log, say, number of PIM Registers to a file with a time stamp.
I would like to log a timestamp, a recognizable delimiter "&" and the output of "show ip rou...
Hi
Im considering implementing ip pim register-rate-limit. Of course to protect my control-plane and RP.
Im not comfortable doing this, if I cannot see if traffic is being rate-limited or not.
I have no way of knowing if the limit I have chosen i...
Hello
I need to find all configs where "ip access-list extended TAC" is configured.
I use the search-field at the top of the Prime Infrastructure screen and write the string ip access-list extended TAC.
This will find all versions of all configura...
Hello
I am trying to make Prime perform a
write mem
redundancy reload shelf
on a VSS switch in order to restart both switches in the VSS
The switch asks for a confirmation - <enter> seems to be the only answer that does not abort the operation
VSS-...
HelloIm trying to make a ACE+caching setup work. Ace is running A5(1.2)Content types considered static (like images, stylesheets and javascripts) should be fetched from caches instead of servers.Content from the caches that can be compressed should b...
It turns out that <Enter> is not the only valid reply to the [confirm] question afterall.
"Yes" is not a valid answer for some reason, but "y" is, so the following template will do the job:
#MODE_ENABLE write memory#INTERACTIVEredunda...
I have the same problem. NetConfig does not seem to handle large numbers of devices very well. That is sad since there is not much idea in CiscoWorks if you have only a few devices. Large enterprise networks are the ones that could really benifit fr...
