Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
TonnyRomm
Level 1
Level 1
Member since ‎04-04-2013
‎08-18-2017
Recent Badges
Awards

User Statistics

  • 13 Posts
  • 0 Solutions
  • 2 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Issue connecting Catalyst 4948-10GE to ISP

07-18-2013
Hello,   I have the following network :----------------------------------------------------------My ISP provided my with the following data :IP : 205.164.28.14Netmask : 255.255.255.128Gateway : 205.164.28.1--------------------------------------------...

Issue configuring routing for Catalyst 4948-10GE

07-17-2013
Hello,  I have the following network :  Port 20 is configured as L3 port with IP = 192.168.10.5Port 22 is part of vlan 4Port 10 is part of vlan 5For node2 default gateway is set to 192.168.1.230I can ping from node2 to 192.168.1.230I can ping from no...

Upgraded Catalyst 4948-10GE to cat4500-entservicesk9-mz.122-54.SG.bin but didn't boot

06-15-2013
Hi, I just upgraded the IOS of 4948-10GE switch to cat4500-entservicesk9-mz.122-54.SG.bin, but during boot process I got this exception :UNHANDLED ROMMON EXCEPTION at PC=0453ab5cVector=00000100 MSR=02029230 LR=0453ab24MCSR=00000000CISR0=00000000 CISR...

Hang during boot of Cisco WS-C4948-S switch

04-04-2013
Hello,   I encountered an issue while trying to boot Catalys WS-C4948-S switch. I power on the switch and I'm able to see the boot messages thourgh serial console cable. But it gets stuck at line "Image text-base: 0x1000000, data-base: ..... ". Also ...
Community Statistics
Member Since ‎04-04-2013 01:09 AM
Date Last Visited ‎08-18-2017 04:01 AM
Posts 13
Helpful Votes Given To
See all >