About alan.blakege

alan.blakege · 12-07-2012

Cisco have EOS 1142-E model only. Any technical reason? Issues with DRS that are not supported in Etsi I hear but not sure.

alan.blakege · 10-03-2012

Hi allThe high availibity feature that gets configured on the AP for primary/sec/tertiary controllers, do both the hostname and IP need to be entered? If you only enter the hostname of a pri/sec controller but do not enter an IP, does the AP try to r...

alan.blakege · 09-27-2012

HiOn a wlc 5508-7.0.116, can I set up 2 ssids that map to one wlan/vlan/subnet. I thought you could but I don't have the means to test without breaking production.My goal is this:Ssid red openSsid blue wpa 2But all clients on the same ip subnetThanks...

alan.blakege · 12-04-2012

Oh and regarding what antennas to pick, use dual band. So u will need 3x dual band antennas.Sent from Cisco Technical Support iPad App

alan.blakege · 12-04-2012

Isn't the 1602i model option cheaper? Then u don't need to buy any antennas and looks prettier.Sent from Cisco Technical Support iPad App

alan.blakege · 10-04-2012

Nothing to do with the possibility that your APs with stronger signal are heavily loaded?Sent from Cisco Technical Support iPad App

alan.blakege · 10-04-2012

So what happens if I don't add an ip but just the hostname. Will it still work? Sent from Cisco Technical Support Android App

alan.blakege · 09-27-2012

Glad to know. ThanksSent from Cisco Technical Support Android App

Member Since	‎09-16-2012 09:37 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	9

User Statistics

User Activity

eos 1142-e-k9....anyone know why?

High Availability - 7.0.116

Multiple ssid to 1 wlan

Re: Design question for CAP1602E and CAP2602E

Re: Design question for CAP1602E and CAP2602E

Re: Client not picking correct AP

Re:High Availability - 7.0.116

Re:Multiple ssid to 1 wlan