About Sandemann

Sandemann · 08-13-2013

HiI have this issue that I got the error code F0864.I have read that the workaround is to unplug the IO module and plug it in again and then do an reset (reboot) of the IO module!?I wonder if I can do this without any interrupt to the environment ?I ...

Sandemann · 05-23-2013

HiI gets this faults when I associate a new blade or boots a blade in one of my UCS Chassis: <faultInst ack="no" cause="thermal-problem" changeSet="" code="F0411" created="2013-05-24T08:11:52" descr="Thermal condition on chassis 3 cause:Local IOM:IOM...

Sandemann · 04-17-2013

HiI have some issues after migrate from CX4 SAN to VNX SAN. Everything is moved from CX4 to VNX and I have disabled FC Uplink port that is connected to CX4. Both my FI's is only connected to VNX.We want SAN boot on our ESXi host, and some of them is ...

Sandemann · 09-11-2012

HiI wonder if there is any setting to set to get a graceful restart, when I update Host Firmware on a Service Profile and select "Reboot now" under Pending Activities. It seems that it just kill the server.Hopefully it is possible to set it to restar...

Sandemann · 09-11-2012

HiI'm upgrading my UCS to version 2.0.3c, and everything is working fine.But when I upgraded the first FI, I got this Major Fault:I don't dare to upgrade the second FI, before I fix this error.I have seen that this certificate has to do with secure c...

Sandemann · 06-13-2013

HiAfter we got these issues, we have decided that we are going back to local disk.Have local disk in all host now, so I think that's the way we solved it.

Sandemann · 05-24-2013

Hi.This started after I put 3 new servers in slot 6 - 8 in this chassis.Blade number 6 seems not to work as it should, because I can't connect to any network from this server, but the other new servers have no problems.So I think that this server may...

Sandemann · 05-24-2013

Hi.UCSM version is 2.0.5aIOM on Chassis is 2.0.5aAll blade in the Chassis have version 2.0.5aIs this what you need to find out more?

Sandemann · 05-06-2013

Thanks a lot, Robert

Sandemann · 05-03-2013

Thanks Robert Let me know when 2.0(5b) is out, when you know! RegardsStig

Member Since	‎09-19-2011 03:34 AM
Date Last Visited	‎10-09-2017 02:31 PM
Posts	34
Total Helpful Votes Received	14

User Statistics

User Activity

Unplug one IO module live in PROD without interrupt!?

Gets Faults on 1 chassis when i config or boots a blade

F0283 VIF 1 / 2 B-42/44 down, reason: Bound Physical Interface Down

Graceful restart when acknowlegde Host Firmware update

Default Keyring's certificate is invalid

F0283 VIF 1 / 2 B-42/44 down, reason: Bound Physical Interface

Gets Faults on 1 chassis when i config or boots a blade

Gets Faults on 1 chassis when i config or boots a blade

Re: B200 M3 - esxi 5.0 slow boot

Re: B200 M3 - esxi 5.0 slow boot