Hi,Does anyone know if it is possible to configure Jabber for windows to start video call in full screen mode automatically.I searched on xml config file, windows registry but did not found anything for this.Thanks for your help
Hi,I've got some devices not correctly recognized by campus manager.In fact every vg224 appears as ciscoProducts.558. i think I have applied last campus manager package.Do you have any idea ?Thanks for your help.
Hi,I have some difficulties to tune dfm. Actually, dfm create alert for event BackupActivated on E1 channel or BRI channel of voice gateway managed.In fact, this is not backup event because channel are used for voice communication.I tried to unselect...
Hi,I'm installing LMS 3.1.LMS is integrated with ACS server.It seems to work correctly but every page are very slow to be printed. When i log on the lms web page, i need to wait 45 seconds or 1 minute before the portal opens.When i try on the lms ser...
I've got lms 2.6 integrated to acs 3.3.This integration worked correctly for some times. But today, campus data collection doesn't detect new switch present in device discovery. Those switch are present in acs as client and we are using acs to authen...
Hello, due to the fact you are using a redundant supervisor, some interfaces are disabled. This is a normal behavior.You can find on datasheet which combinations are possible(http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps9294/product_da...
Hi jclarke,Thanks for your answer.I try to do what you tell. But i always receive critical alert.Here is the event desciption :EVENT DESCRIPTION = OperationallyDown::Component=IF-10.181.32.10/362 [BR0/2/1];ComponentClass=Interface;ComponentEven...
hello jclarke,I configured ACS integration with ip address of ACS, so i didn't about a dns issue. After configuring an entry in the host file of LMS, the interface is now very reactive.The problem is solved.Perhaps ACS server use dns name for the con...
