Hi all,
Using the above image as a reference point, you can see that with the configuration guide for OTV best practice, we'll break inter-vlan routing between DCs.
Here are some logical steps one might take when troubleshooting this:
1. Why no...
I DEFINITELY have a network interface connected/powered on for the VM. Anyone seen this type of error before?
I've tried powering it off, removing the network interface, readding, etc.
Hi all,I'm seeing the following error when I try to use AnyConnect to establish an SSL VPN Connection. My understanding is that this error shows up when AnyConnect thinks that the individual is being a Captive Portal..per this link: https://learning...
Hi!We've picked up a Cisco 819 to play around with the cellular capabilities (SDP down the road).I have an unlocked Verizon SIM card installed..yourname#sh cellular 0 security Card Holder Verification (CHV1) = DisabledSIM Status = OKSIM User Operatio...
Hello! Pretty basic setup...2 VLANS:10.0.0.0/24 and 10.0.100.0/24SVI for the first one is 10.0.0.1 and the SVI for the second is 10.0.100.1.I've configured two DHCP pools as follows:ip dhcp pool Home_Data network 10.0.0.0 255.255.255.0 dns-serve...
So I fixed the problem.
Using Cisco's recommended guest OS "Use Guest OS as Linux CentOS 4/5 32 bit" DOES NOT WORK. I used "Other Linux 32-bit OS and it immediately started working.
Check out my blog post for this issue: http://kylesnetworkingblog.blogspot.com/2013/12/cisco-819g-4g-v-k9-verizon-4g-wan.html I ended up getting it resolved. The issue (for me) was that I didn't configure line 3 with the dialer script and the "modem...
Jumora--Yep! I got that part solved and I was missing the command you just identified! Now I'm thinking this is not an ASA problem..but an issue with my 2811-which appears to have inter-vlan routing issue. I've created a separate thread here...htt...
