The Cisco 8000 Command Reference guides are out here:
https://www.cisco.com/c/en/us/support/routers/8000-series-routers/products-command-reference-list.html
Update: With the fix for CSCuz01748 a router reload is no longer required. CSCuz01748 is fixed in XR version 6.0.2 and 6.1.1, and onward versions, so the router reload is not required. If you are using prior XR versions than 6.0.2 and 6.1.1 then a r...
hi Andy,
There is a SMU and a Service Pack to fix this issue in 5.3.3, depending on if you are using SMU's or Service Pack's. You can download them from the SW download section on www.cisco.com
asr9k-px-5.3.3.CSCux78222.pie
orasr9k-px-5.3.3.sp1.pie
...
hi Derek,You would get the "location" from the output of "show platform". IOS XR uses r/s/m/p orrack/slot/module or bay/port for standard port nomenclature (additional nomenclature for features live nV/ASR9K or port slicing/NCS)Instead of 0/0/0, use ...
hi Mohammad,We do have an alternative feature that is useful for very large and repetitive configurations on the ASR 9000, calledFlexCLI where we have the abaility to create config groups and apply them to multiple interfaces. This feature came out i...