About Carlos Silva Sosa

Carlos Silva Sosa · 01-22-2013

Hello everybodyYesterday I tried to configure a 881 router which has an IP-Phone 7975 and one workstation. However the CUCM is in the other part of the city.The network where the CUCM has been connected can be reachable by VPN.From the VPN router I h...

Carlos Silva Sosa · 10-24-2012

Dear teamAt the moment I have a problem with a WLC. This WLC is not booting by the fact it does not have an image. In the past option 5 in the following menu was selected.Now I received I message when I select option 6. Telling me that if I upgrade f...

Carlos Silva Sosa · 05-01-2012

HiI try to connect a Router as an Endpoint (Because I just want to use a SERVICE from it).Well, the issue is this: I have a SW L3 that have too much VLANS, It is routing traffic and it provides internet connection. VLAN 182 has been created at this p...

Carlos Silva Sosa · 04-23-2012

At the moment I am using CUCM 8.6. I have registered 3 IPPhones 9971, 7975 and 7925 wireless.I want to add an Username or a description beside the Extension number in the IPPhones display. However I do not find the option into the CUCM.Thank you in a...

Carlos Silva Sosa · 04-13-2012

I have access to a LAN which a CUCM is running. If you connect an IPPhone to this LAN, It is registered without any problem. However I can connect by VPN to this LAN. I'd like to provide this connection to the IPPhone discussed before when I connect ...

Carlos Silva Sosa · 01-28-2013

Hi MichalEverything that you told me was correct in the Router 881 Side. However the problem was with the Router VPN Server.In the section crypto isakmp client configuration group [name]Line ------> save-password This line was missing and for that, t...

Carlos Silva Sosa · 01-23-2013

Hi MichalI have configured "crypto ipsec client ezvpn Netmedical inside" under VLAN1. I realized that "show crypto ip cl ez"is changing quickly.It shows me:different status As you can see in the picture. Workstation on the router881 can connect to th...

Carlos Silva Sosa · 01-22-2013

Hi MichalYes, when I connect my computer to VPN by "VPN-client" I can reach the CUCM.But when I configure the Crypto I can not reach the CUCM by pinging from Router 881.In other words, ping 10.0.80.75 source 192.168.1.1where 10.0.80.75 is CUCM IP-ad...

Carlos Silva Sosa · 01-22-2013

Hello Michal, thsnk you so much for you quick responseI type the config that you provided meAnd I got the following resultROUTER881#sh cry ip cl ezInside interface list: Fastethernet1Outside interface: FastEthernet4Current State: TUNNEL_INT_UPLast Ev...

Carlos Silva Sosa · 05-02-2012

Hi Reza, thank you for your attention.But VLAN 182 is already added in all the network.The 4 switches have VLAN 182 in their VLAN Database.And you know something I can reach it.Someone help me. He told me that if I want the router acting as a host I ...

Member Since	‎04-10-2012 07:41 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	19

User Statistics

User Activity

Router 881 connecting to VPN Router

Cisco WLC 5508 without image

Connecting a Router as an Endpoint

Display Name or Description in IPPhone Display

VPN connection in Laptop and provide connection to IPPhone.

Re: Router 881 connecting to VPN Router

Router 881 connecting to VPN Router

Re: Router 881 connecting to VPN Router

Re: Router 881 connecting to VPN Router

Connecting a Router as an Endpoint