Bobby and I have finished and published Version 2 of the solution. Better documentation, a completely new macro. And, it is published on the web here: https://roomos.cisco.com/macros
Scroll down until you see USB Mode Version 2.
Hello everyone - in my role as a Technical Marketing Engineer within the CTG Business Unit at Cisco, I have designed and implemented literally dozens of conference rooms, for internal Cisco as well as customers, using two Quad Cameras. It is true th...
Hello meeksy -
Go to the web interface of one of the codecs. Setup / Configuration / Audio.
Then scroll down to the HDMI input that you are using for the computer. Make sure that Mode is set to On. There is also a setting "VideoAssociation MuteOnIn...
For macdonaldmauye -
Do you have more than one Quad Camera hooked up to your Codec Plus? If so, that is your problem. A single codec can have only one Quad Camera.
If you have a conference room where you need more than one Quad Camera, that is a cus...
Please check with your account team, regarding CMS. I know it has a gateway for Skype for Business; I don't know if it also works with MSFT Teams. But it is an on-prem solution, and you may already have a CMS bridge in your network.