Bobby and I have finished and published Version 2 of the solution.  Better documentation, a completely new macro.  And, it is published on the web here: https://roomos.cisco.com/macros   Scroll down until you see USB Mode Version 2.

Hello everyone - in my role as a Technical Marketing Engineer within the CTG Business Unit at Cisco, I have designed and implemented literally dozens of conference rooms, for internal Cisco as well as customers, using two Quad Cameras.  It is true th...

Hello meeksy - Go to the web interface of one of the codecs. Setup / Configuration / Audio. Then scroll down to the HDMI input that you are using for the computer.  Make sure that Mode is set to On.  There is also a setting "VideoAssociation MuteOnIn...

For macdonaldmauye - Do you have more than one Quad Camera hooked up to your Codec Plus?  If so, that is your problem. A single codec can have only one Quad Camera. If you have a conference room where you need more than one Quad Camera, that is a cus...

Hello -  Please check with your account team, regarding CMS. I know it has a gateway for Skype for Business; I don't know if it also works with MSFT Teams.  But it is an on-prem solution, and you may already have a CMS bridge in your network.