About mircea.alicu

mircea.alicu · 11-23-2013

Hi all,My internet provider is giving me two ip classes (/29) that are routed to my external IP (applied to Gi0/0)I configured split tunneling on my router like described here:http://www.cisco.com/en/US/products/hw/routers/ps274/products_configuratio...

mircea.alicu · 12-15-2013

I'll answer it myself...route-map noNAT permit 10 match ip address 111Change static nat entries to:ip nat inside source static 10.10.10.16 85.186.xx.aaa route-map noNAT extendable....

mircea.alicu · 12-01-2013

Anybody?

mircea.alicu · 11-24-2013

Assuming that your radio endpoints are bridged, then you won't need the site to site ipsec vpn and probably won't even need a router on location B. But because your experience with cisco is limited, you should probably hire somebody to do it for you....

mircea.alicu · 11-23-2013

Hi Adrian,First you need to configure both routers in their location so they can access the internet, then configure router on a stick for both (trunk between router and switch with separate vlans for voice and data)-http://www.firewall.cx/cisco-tech...

mircea.alicu · 01-24-2013

Hi,You can monitor network traffic bandwidth for any given port of the switch via snmp and a cacti server for example.... If that's what you mean

Member Since	‎01-22-2013 05:17 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	8

User Statistics

User Activity

Split tunneling and static nat

Split tunneling and static nat

Split tunneling and static nat

Re: Cisco 2900 Router

Re: Cisco 2900 Router

Monitor traffic