About kdotzoltan_2004

kdotzoltan_2004 · 07-02-2012

Hi,we have TACACS+ based AAA on our network equipment, authenticating against internal user database on a network of ACS 5.3s.What I want is to limit certain AAA users (namely automated tools) to be only permitted to authenticate from a list of known...

kdotzoltan_2004 · 07-08-2011

We have some ASA 5550 devices, with software versions:Cisco Adaptive Security Appliance Software Version 8.4(1) Device Manager Version 6.4(1)as part of an SSL VPN architecture.All have publicly signed certificates, but on some the certificate chain i...

kdotzoltan_2004 · 10-12-2010

We have a CSM blade in a 6509, IOS 12.2(18)SXF7, CSM softvare version 4.2(7);We'd like to create a serverfarm, where servers are checked for several ports and only considered as working when all probes succeed.Although Cisco docs state that there sho...

kdotzoltan_2004 · 02-23-2006

Hi! I would like to add a Sony PCS-1P (H.323) terminal to an existing Cisco (IP/VC 3540, software version 3.2)+ Polycom (Viewstation EX - several terminals) installation. The hole infrastructure runs on H.323, and there's no CCM, so SCCP isn't an opt...

kdotzoltan_2004 · 12-13-2005

I have a CCM 4.1(3) installed at a client, and they have the following request: - they want phone line redundancy (OK, this can be achieved easily with Route Lists/ Route Groups) - but they DON'T want calls to go through the second provider if the fi...

kdotzoltan_2004 · 01-28-2013

Hi,I know this has been a whie ago, but have you figured this one out by any chance?I see a very similar problem, although I'm dialing in through SIP trunks from two different locations to a third site, which connects to a local PBX through E1/ISDN. ...

kdotzoltan_2004 · 07-04-2012

To anyone who may be searching for this:CSM can do authentication from a non-Cisco TACACS server and you can register ACS 5.x as such. However, authorization in these cases will have to come from the CSM's internal database.In short: you can use the ...

kdotzoltan_2004 · 07-04-2012

Thanks, I guess this is what I was looking for, although for now our service selection rules are just the basic set.

kdotzoltan_2004 · 03-26-2012

Hi James,any luck sorting this out? Where did you find the initial guidance to set this up?I'm trying to manage a similar setup, and i assume some Custom Attributes might do the trick but I'm unable to find anything online.

kdotzoltan_2004 · 07-18-2011

Hi Marcin,it seems I was trying to install the wrong intermediate certificate. Checking with Verisign's similar tool (as the certificate was issued by them), I have also got the appropriate intermediate certificates I needed to install and that has b...

Member Since	‎08-18-2004 07:30 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	33
Total Helpful Votes Received	9

User Statistics

User Activity

Limit AAA authetication for certain users by source IP

installing an intermediate certificate on an ASA?

Multiple health probes on CSM

IP/VC 3540 vs. Sony PCS-1P /monitor disabled/

Redundant routes, but only when link fails

Call failing- Mandatory information element missing

CSM 4.1\ACS5.1 non-ACS AAA failure

Limit AAA authetication for certain users by source IP

CSM 4.1\ACS5.1 non-ACS AAA failure

installing an intermediate certificate on an ASA?