About Cuong Nguyen

Cuong Nguyen · 07-16-2014

Hi all,I recently brought up a virtual Lab running Cisco IOS-XRv 5.1.1 over ESXi 5.x. Since XRv 5.2.0 is out - I'd like to try new features with the lab that I have built.Unfortunately, I cannot find any way to perform "software upgrade" to keep the ...

Cuong Nguyen · 07-16-2014

Hi Sherif Ismail,I encountered this and checked around. It seems that XRv supports Control-Plane features fully - BGP/IGP/LDP/PIM/etc. will work. However, Data-plane is supported with limitations. Cheers,Cuong.

Cuong Nguyen · 05-30-2013

Hi Xander,I've sent a private message to your Inbox.I mentioned about the chassis issue to say that it is possible to replace the whole chassis (in our case, for example). The chassis is not in any nV; it is running as an independent node.Best regads...

Cuong Nguyen · 05-30-2013

Hi Xander,Thank you for the command.And for your information, we do have an ASR9010 chassis that is unable to detect and show the Power Module correctly. TAC has been suggested us to replace. We haven't had a chance to do it since the change has a gr...

Cuong Nguyen · 05-30-2013

Hi Xander,Thank you for the prompt response.On the Bundle-Interfaces and LACP, do you know the command to get the EEPROM of the chassis?I guess in order for the LACP and Bundle-Interfaces to continue to work withour disrupting current traffic, the co...

Cuong Nguyen · 05-30-2013

Hi Xander,Regarding to the "7. Feature configuration caveats", I'd like to check:0. Are those caveats fixed in 4.2.3 and SMU?If not, then:1. If there have only Bundle-Interface and EVC configured on those bundle-interfaces, is manual MAC address sett...

Member Since	‎10-08-2009 02:23 AM
Date Last Visited	‎10-26-2018 12:04 AM
Posts	2

User Statistics

User Activity

IOS-XRv Software Upgrade

Hi Sherif Ismail,I

Re: ASR9000/XR: Cluster nV-Edge guide

Re: ASR9000/XR: Cluster nV-Edge guide

Re: ASR9000/XR: Cluster nV-Edge guide

Re: ASR9000/XR: Cluster nV-Edge guide