Hi team,
I have configured the policing as below
policy-map Rate_limit class Ratelimit police 1500000 1000 conform-action transmit exceed-action drop
If i go with the formula of CIR (cir=bc/tc), the value of CIR is 1509433 , which is coming more ...
Hi All,
Consider I have 4 routers which have a leg towards an external network. If all have equal costs to reach this external network, then which ASBR will advertise the routes to it peers in that area
___ R2 -- |
|___ R3 --| external
R1 -- bro...
Hi All,
I am going to upgrade the IOS of 7200 from 12.4 to 15.1(4)M10. As a process I need to upgrade the kboot image as well. The required Kboot is of 10Mb however my existing bootflash has only 9 Mb.
So just wanted to check whether will I be able t...
Hi All,Is it necessary to mention snmp-server trap-source <interface name> while configuring SNMP in a router/switch?. what if we do not configure this command on a device having multiple interfaces?Regards,VB
Hi All,Would like to know the maximum no. of recommeded switches in a 3750 stack. I know the maximum allowed is 9 but wanna implement the best practice knowing the same.Please let me know link wherein cisco as mentioned the same.regards,VB
CIR is calculated by the formula Bc/TcSo in my case Bc=1000bytes = 8000bits and Tc =5.3 ms , implies, CIR = 1509433
If i configure police to 1500000 with Bc 1000 bytes, it means that during the period of 5.3ms , i can send no more than 8000 bits of t...
Hi Rick, sorry for the confusion.
Can you please look into the latest diagram and suggest y routing information from R1 is getting destined to R5 rather than R2 ?
Hi Rick,
Thanks for the reply.
Sorry to bug you all .I have some doubt again.
Attached is the scenario. I have tried this however R1 ip route output is as below,R1>sh ip route 10.0.0.0Routing entry for 10.0.00/16 Known via "ospf 1234", distance 110...
