About willwetherman

willwetherman · 01-29-2011

Hi All,We are currently migrating to a VPLS network that will be connecting to a maximum of 50 sites. Each site will provide seats for a maximum of 40 users.We are planning to install Cisco 3560G switches into each of the sites and create separate VL...

willwetherman · 02-05-2010

Hi,Can anyone confirm if a new license needs to be purchased to upgrade from Unity Connection 1.x to 7.x even if a Smartnet Contract is in place?Many Thanks,Will

willwetherman · 10-07-2009

Hi,We have 2 x AIR-BR1310 setup with a point to point bridge between 2 offices, see below.Office2---Bridge2------Bridge1---Office1At random periods of the day the link drops and office1 is unable to contact office2. Upon further inspection the Bridge...

willwetherman · 02-26-2009

Hi All,Has anyone managed to get this to work? I have got this working with Presence 6.0.3 and Exchange 2003 but not 2007.Thanks,Will

willwetherman · 01-12-2024

Hi @andy!doesnt!like!uucp The upstream/parent FE is a C9300X running IOS-XE version 17.9.4. DNAC is running version 2.3.5.4 This is the default port config on the FE when the global authentication template is set to none. interface TenGigabitEtherne...

willwetherman · 01-10-2024

Hi @Sylvain_Che If the new switch is being onboared automatically as an Extended Node, I'm assuming that you are connecting it directly to another Fabric Edge switch? If so, and if you are using 'None' as the global authentication template for your ...

willwetherman · 10-21-2023

I have customers running IP address pools with large quantities of Cisco IP phones without any issues. I know that Cisco provided some recommendations about subnet sizing for IP phones in a traditional netwok, however this was primarily to prevent is...

willwetherman · 11-19-2022

Hi @StefanSeubert44470 Thanks for sharing your observations. I was not aware that DNAC provisioned multiple site tags per building depending on the number of APs installed. I've read through the various user guides and release notes, and there is no...

willwetherman · 11-07-2022

This will be caused by the restricted shell feature that is enabled by default in the later versions of DNA Center When you SSH to maglev, you need to enter command '_shell' to enter the bash shell to be able to run commands such as tcpdump. You can...

Member Since	‎11-02-2006 12:35 PM
Date Last Visited	‎01-31-2024 12:13 AM
Posts	299
Total Helpful Votes Received	629

User Statistics

User Activity

VPLS Network EIGRP Stub

Unity Connection upgrade 1.x to 7.x

Wireless Bridge dropping traffic

Presence intergration with Exhange 2007

Re: LAN Automation vs PnP conflict

Re: LAN Automation vs PnP conflict

Re: SDA Subnetting Best practices for Voip Networks

Re: DNAC and C9800 Confusion regarding site tag

Re: Maglev cli