Can anyone help me with what I'm missing when it comes to configuring a 2821 router with a NM-16A module for a terminal server.Here is my configip routing!interface ethernet g0/0ip address 10.1.1.3 255.255.255.0!ip host R1 2065 10.1.1.3!ip route 0.0....

I've been reading a bunch of different posts on how to rate limit a 3560 inbound and outbound using different QoS methods.  Can anyone narrow it down for me please?  I've read about vlan class maps/policy maps, using the rate limit command on the phy...

So I'm stuck on something.  I'm trying to configure intervlan routing between a cisco 2801 router and HP/Amer switches.  Using int fa0/1 and subinterfaces I was sure I had it configured correctly, but I cannot ping the default gateways when I place a...

So I'm having issues getting data to come across this site to site tunnel.  The remote site needs us to NAT the destination network because they have an overlap.  I hope this makes sense.Remote Endpoint - A.A.A.ARemote LAN - 156.30.x.xLocal Endpoint ...