churchillma

Hello. The interface is active and I'm able to access the router remotely in that IP. As for the cab...

Can anyone help me with what I'm missing when it comes to configuring a 2821 router with a NM-16A mo...

What about adding these commands to the switch?mls qosint vlan 400rate-limit input 5242880 5000 5000...

I've been reading a bunch of different posts on how to rate limit a 3560 inbound and outbound using ...

Well I added those ports as tagged on the vlans, no luck. I have all ports untagged on default vlan ...

As stated I have HP switches. No help

So I'm stuck on something. I'm trying to configure intervlan routing between a cisco 2801 router and...

Sorry, this was confusing. Basically my local lan IP that needs to be accessible over this tunnel is...

The remote side is trying to ping 10.0.202.183 since they already have a 192.168.10.45 on another VP...

Well I don't know if that is the same as the above person, but we'l see. Here's hoping.

That sounds about right. The remote site is trying to ping/hit 10.0.202.183 which is what I'm trying...

So I'm having issues getting data to come across this site to site tunnel. The remote site needs us ...

Yeah, nothing has changed and I did delete and recreate the cryptomaps. Magically, everything came b...