About Cisco_CoE .

Cisco_CoE . · 10-31-2016

Hi, I am looking for a replacement for th IDSM-2 Module. Something that functions similiar to the IDSM-2. Thanks,

Cisco_CoE . · 07-19-2016

Hi guys, Can u please help on these. 00:01:32: %C6KPWR-SP-4-PSREDUNDANTBOTHSUPPLY: in power-redundancy mode, system is operating on both power supplies.00:01:35: %OIR-SP-6-PWRFAILURE: Module 1 is being disabled due to power convertor failure. PMB r...

Cisco_CoE . · 03-29-2016

What are the minimum requirements needed for configuring a VPN between cisco ASA 5510 and microsoft Azure virtual firewall

Cisco_CoE . · 07-19-2016

Hi Leo, Thanks for the update. Please note that module 3 got disabled only after i insert the IDS . 00:17:48: %OIR-SP-6-PWRFAILURE: Module 2 is being disabled due to power convertor failure. PMB registers are dumped as follows, R0= 0x2, R1= 0x2, R...

Cisco_CoE . · 07-19-2016

Hi Leo, Thanks for the quick response. Kindly confirm two things 1. Have you checked the log i have attached ? 2.Is there is any clear evidence we can point out before going out for a chasis replacement.

Cisco_CoE . · 07-19-2016

Hi Leo, Problem is IDS is getting rebooting continuously. Observed same when inserted to other slots too. Same type card is working in other slot. Here is more details. Router#[Ash modMod Ports Card Type Model Serial No.--- ----- -------------------...

Cisco_CoE . · 03-29-2016

Hi Ejas, Thanks for the help. Actually i am using ASA version 7.0 in 5510. My concern is that whether the tunnel will work with this ASA version.

Member Since	‎11-18-2009 12:51 AM
Date Last Visited	‎09-05-2018 12:26 AM
Posts	9

User Statistics

User Activity

What replacement products are available for IDSM-2 ,cisco 6500

cisco 6500 power to module in slot 1 set off (FRU-power failed)

VPN between asa and azure

Hi Leo,

Hi Leo,

Hi Leo,

Hi Ejas,