Hi Jay,R7 and/or R8 are IOS-XR?Cisco software requires a /32 route for each next-hop that should be label switched. In the CSC / Inter-AS B/C options, in IOS-XR you must add manually a /32 static route for the peer address of the interconnection in o...
Hi Rebekah03,This responsibility is very common for most of the network engineers. However, it could be a mandatory duty for a Network Operations Engineer. It really depends on the company.For your resume you could use something like this:Administeri...
Hi,I recommend you to create PW Classes:7600 SeriesRouter(config)#pseudowire-class TESTRouter(config-pw-class)#encapsulation mplsRouter(config-pw-class)#interworking ? ethernet Ethernet interworking ip IP interworking vlan VLAN inter...
Hello Manoj,This could be done with ACL, and it should not go on an interface, it should be applied on the VTY lines.For example if you only want to allow SSH access from 172.16.1.0/24 and block other requests (like Telnet) try the following.R1(confi...
Hello Sharmin,Please confirm that you removed the access list from all the interfaces where it has been applied.Regards.Please don't forget to rate helpful posts.
