About philippe.cousineau

philippe.cousineau · 02-05-2015

Guys, I have a Jabber cluster, I can access my Publisher in Admin & OSAdmin, but I can't access anymore the OS Admin of the Subscriber, I don't know why but I have an error with the credentials. I can't remember if the OS Admin password on jaber s...

philippe.cousineau · 11-14-2014

Guys, any recommendations for a migration of CUCM 4.3.2 to 10.5 Do you recommend a path with DMA ex : 4.3.2 with DMA to 7.x then use Prime collaboration to upgrade to 10.x ? thanks

philippe.cousineau · 07-31-2014

Guys, We have a CUCM 9.x at a main site (Site-A), with a h.323 Gateway.The h.323 Gateway have a Sip Dial-peer with another cisco pbx in another Country (Site-B). In the past, people at Site-B used to called 816XXX to reach Site-B devices, and People...

philippe.cousineau · 05-16-2014

Hi Guys,I have a CUC Cluster of 2 nodes at 9.1.2 I did a Cobra restore and since the cobra I have an issue when I go to Unity Connection Servicability and thenIf I go in service Management I have this error : " Error: Unable to communicate with ser...

philippe.cousineau · 03-19-2014

Hi, I have a big issue here I am running CUCM 8.x, after a while we saw some problem : - if we are on call and get another call, we can't get the second call ( it hung up ) - we can't transfert or do Conference If we restart IPVoice Media str...

philippe.cousineau · 11-21-2014

Which services did you restart to fix this

philippe.cousineau · 10-31-2014

Yes, I wanted but I wasn't able to create a HTTP trigger because I have a CCX Standard which doesnt allow that feature. my Customer wanted to have an external server who pull the stats from UCCX.I finally used the wallboard user and find what I was l...

philippe.cousineau · 09-16-2014

Shobhiy@78,If we talk about the scenario without PCD ( Prime collaboration deployment ), If we can use the Jump upgrade procedure to migrate to 9.1.2 ( or 10.x here ) Why do you said you have to upgrade from 7.1(3) to 7.1(5) on your MCS, before do...

philippe.cousineau · 07-31-2014

For that specific scenario, Do you recommend any other command to debug thandebug voip dial-peer ps : The Inbound CSS of the Gateway On Call Manager side reach the Partition extension in the actual scenario

philippe.cousineau · 07-29-2014

I got the same issue and it was a problem with the firewall alsonewer than 8.3(5) use SCCP version 17 Firewall (Juniper SSG) use a ALG Service and it don't support the SCCP version 17We used the command unset alg sccp enable and now, all the phones a...

Member Since	‎10-10-2007 04:04 PM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	437
Total Helpful Votes Received	76

User Statistics

User Activity

Os Admin Reset Of Subscriber

CUCM migration 4.3.2 - TO - 10.5

CUCM 9.x with Gateway - Troubleshoot call leg

Unity Service - Error: Unable to communicate with service control center

CUCM 8 - Can't take second Call, Can't transfert Call, IPVMS reset

Which services did you

Yes, I wanted but I wasn't

Re: Upgrade path from CUCM 7.1.3 to CUCM 10.0

For that specific scenario,

I got the same issue and it