About ThibaultMean

ThibaultMean · 02-13-2014

Hello,I'm trying to acquire users information on a 6500 switch in VSS.I first tried in snmpv3 which did not work with the "context vlan- match prefix" trick, I then switched back to v2 but still not luck.I've got all the required MIBs ...Did anyone f...

ThibaultMean · 01-09-2014

Hello,I'm trying to setup LMS Prime 4.2.4 so that i retrieves existing IP SLA configuration on a device.It seems that either it does not work or I don't do it properly.Can someone tell me how to fetch IP SLA config/ statistics from a device into LMS ...

ThibaultMean · 01-07-2014

Hello,Does anyone know how to reduce the size of the snmp request sent from LMS to FWSM so that it is below or equal to 512 bytes ?I get a lot of these messages saying the SNMP request from LMS prime has been discarded because the size was too big (7...

ThibaultMean · 09-05-2013

Hello,Is it possible that a ASA fw self initiates a L2L VPN connection with ip sla or any other mechanism to a central firewall?This is in the case of a dynamic L2L VPN.I'm wondering since the VPN access-list would only be triggred by passing through...

ThibaultMean · 05-17-2012

Hello All,I'm dealing with this really odd behaviour.I have a bunch of routers connected as per the attached diagram.I am redistributing the 200.200.200.0/30 network into OSPF on R2Redistribution occurs as I can see the route installed in R1 routing ...

ThibaultMean · 01-10-2014

I managed to get the file import working so here are my findings :If you want to use a file to import IP SLA collector, keep in mind that LMS prime will create the ip sla config on the source device anyway but as it is done through SNMP a "show run" ...

ThibaultMean · 01-10-2014

Thanks for your answer.I was very happy until I realized the polling frequency was abitrary set to 1 hour for all the discovered collectors.Been trying to use a file to manually import collectors now for hours as it seems the only way to set the poll...

ThibaultMean · 01-09-2014

You've made my day.Thanks

ThibaultMean · 01-09-2014

I've worked on this a bit more and realized that the polling frequency for the FWSM linterface utilization was 15 mins.I've lowered it to 5 mins and now it is working fine. Not sure exactly why...Thanks,Thibault

ThibaultMean · 01-07-2014

Hello Vinod,Thanks for answering. The FWSM is running version 4.1(1). But I see the enhencement is for asa 5500-x not FWM.I'm more looking into the way LMS works, when does it send packets larger then 512 bytes?Funny, here we're dealing with cisco to...

Member Since	‎07-16-2010 01:27 AM
Date Last Visited	‎08-18-2017 04:01 AM
Posts	70
Total Helpful Votes Received	28

User Statistics

User Activity

LMS Prime 4.2.4 - User tracking acquisition failed on 6500

LMS Prime 4.2.4 - IP SLA discovery

LMS Prime 4.2.4 - FWSM and SNMP bigger than 512 bytes

ASA self initiating L2L VPN - SLA ?

OSPF - NSSA point to multipoint network

Re: LMS Prime 4.2.4 - IP SLA discovery

Re: LMS Prime 4.2.4 - IP SLA discovery

Re: LMS Prime 4.2.4 - IP SLA discovery

LMS Prime 4.2.4 - FWSM and SNMP bigger than 512 bytes

LMS Prime 4.2.4 - FWSM and SNMP bigger than 512 bytes