Hello,Thanks in advance for anyone who can help to clarify the situtation my customer has for Nexus 1010.One of our customer bought a pair of Nexus 1010 physical appliance. One thing strange is that both Nexus 1010 do not come with 1 x Quadport GE NI...
Nexus 1000v/1010 experts:Can someone clarify the difference between Nexus 1010 CIMC interface and management 0 interface?I read lots of cisco docs about Nexus 1000v and Nexus 1010, but have not get my hands on physically.1) You can assign IP address ...
Hello Cisco Data Center Solution/Architect experts:As a cisco partner, we recently submitted a RFP(request for proposal) for one of our data center customers to upgrade their data center infra-structure and design/solutions. After 1st round of bid, i...
Hi,I recently installed a new cisco C6509E chassis with WS-SUP32-10GE-3B, there is weird logging messages.Can someone help me to explain this? It will be greatly appreciated!Here is the chassis info,XXX_6509# sh module Mod Ports Card Type ...
Hi all,I have a question about ISR2821 as a BGP router. Here is the info,We have a customer currently having one ISP (20MB) with ISR2821 as edge router running BGP accepting only default route from current ISP. They will soon bring up another 100MB l...
Aniks,Thanks very much for your quick response!!!As I know, Nexus 1010 is built on top of C-Series Rack server. Below is my understanding:1) CIMC is the out-of-band management port for remote management/access to Nexus 1010.Explanation: a) CIMC...
Hi Rob,You need to re-seat the SUP in question (redundant SUP in your case): loose the screws completely on both sides of the Supervisor engine, then slide out the supervisor blade, slide in/reseat the supervisor engine blade properly.Using show comm...
Milan,Thanks!In your case, the total memory used by BGP is less than 1MB (3,000 prefix).I believe that even with big ISP, say Cogent, their directly connected customer prefix less than 40,000. Counting two ISPs, the prefix number will rise. 256Mb mem...
Hi,You missed the following on ASA:crypto map TELEFIN_LAN_map 1 ipsec-isakmp ####phase 2 SA policy not acceptable! (local 1.1.1.1 remote 2.2.2.2) ########The dedug message essentially says: phase 2 SA policy not matching, and was not acceptable. Af...
Hi,Your IP address and subnet has problems.Serial4/7 is up, line protocol is up Hardware is M8T-V.35 Description: CUS: ABCD Internet address is 162.192.48.119/30 162.192.48.119/30 is broadcast address of subnet 162.192.48.116/30.162.192.48.116/30 has...